Forum: Powertrain

Well in just under 7 hours the cam is in. It's a '04 Z06 cam and springs. We went by Allen's way of rotating the cam and praying the lifters stayed...

is there any advantage to putting in bigger injectors without turbo or SC into an engine? would it be better for it/worse/ or do nothing?

i have a 05' crewcab bowtie and i was wondering if it has a governor cuz it starts to feel forceful towards 105....can anyone give me some feedback...

think i'll just run the av over to joe at jag and let him buillet proof my tranny before the radix...dont think im gonna do all this stuff myself and...

i have a question.. im getting ls1 fans and i have a 160 tsat and im thinkin about getting this underdrive pulley...

anyone have a step by step procedure for installin ls1 electric fans? like taking off the mechanical fan and all that good stuff i dont mean like a...

Okay, so i was gonna do my Transgo/trans work this weekend, but the new LPW pan didn't show up :whack: So instead of sitting around feeling sorry for...

Howdy, I recently put all new brakes on the rear of my truck as the front brakes were still fine. I replaced pads, rotors, and parking brake...

Ok so what could be my problem ??? Here's the situation : If the gear selector is in D or 3 nothing happens, but if I put the selector in 2 or 1 then...

http://www.superchevy-web.com/tech/0311sc_4l65e/

last night i replaced my stock throttle body with a shaners throttle body. i had my GF floor it with the truck off and it hit the bump stop fine....

Ok, so monday I am taking the truck to the tranny shop to have it checked out, if its gonna be more than about $500 to fix I am considering just a...

well i've had a grinding noise coming from the right rear tire at first i thought it was a bearing or seal gone bad in the rear, well i pulled the...

History: I have a 2002 5.3 motor and 4l60e. The motor is stock and the tranny has a transgo kit and a trailblazer stall. Aftermarket harness to the...

So yeah new truck new issues, lets see if someone can offer a suggestion, basically the trans doesnt like to shift into 3rd gear under normal...

One last item I need to get is a deep tranny pan before before installing my new servos, Transgo, etc. I think cast aluminum is the way to go, but...

Okay, i've decided to go for it and get the AMSOIL BMK-13 Dual Remote By-Pass kit. For $20 I bought me a 1 year preferred customer membership, so the...

what do you reccomend using the towing or street strip ??? with the stufff i have done i can already chirp 2nd and it shifts prety hard will the...

Im planning on going with the McGaughys 2/3 Deluxe drop kit but I would like it to handle as best as possible and give me as much traction I can...

I have been investigating the '05 elect fan set up for a while. Even purchased the fans and they are in the garage. Proved to myself that the new...