Rolling Idle too high !

[RedHeartbeat]

Is the brahe vacuum booster leaking? Normally i would think the rpm would be high all the time if it had a vacuum leak but since you're messing with the tune you may be affecting its response.

[farmtruc]

sent you an email.

[2boosted]

sent you an email.

Sent you 37 emails, so....where is the catch? Lol

I'll try what you said, but hitting the TF instead of TC don't make sense in my analog brain.

Thanks for your time bro...I know that between the Protologist appoiment and the emails, and defying acceleration laws you must be crazy !

[2boosted]

Fixed.

Lowe values in TF, 0 values in TF, and smother values in the RAF tables.

Off gas stady at 1000rpm, brake full, idle return smooth.

Thanks all for the help.

Regards

[2boosted]

Is the brahe vacuum booster leaking? Normally i would think the rpm would be high all the time if it had a vacuum leak but since you're messing with the tune you may be affecting its response.

My first gunshot was Vaccum. No luck there.

Tonight I'll try to 0 the Throttle Cracker, and smoth down the Throtle Follower.

Rafs are pretty much on dot, but I'll test lowering some grams if the above table adders do squat !

Thanks Greg for the pointer !

[2boosted]

Is the brahe vacuum booster leaking? Normally i would think the rpm would be high all the time if it had a vacuum leak but since you're messing with the tune you may be affecting its response.

My first gunshot was Vaccum. No luck there.

Tonight I'll try to 0 the Throttle Cracker, and smoth down the Throtle Follower.

Rafs are pretty much on dot, but I'll test lowering some grams if the above table adders do squat !

Thanks Greg for the pointer !