+ Reply to Thread
Results 1 to 10 of 32

Thread: caddillac esky issue

Hybrid View

  1. #1
    Join Date
    May 2008
    Location
    Crossett,Ar
    Posts
    2,382
    Dude I wonder if thats the problem with my truck. Mine only has a problem when the battery dies as well! Imma try it when I do my cam swap! If you just fixed my truck Ill actualy owe you guys one. Even though I am kinda stealing your thread. My friends always blaimed the tune... I always blaimed it on a bad ecu. But it would make sense if that was the real problem being how well it runs after it relearns the "adaptations" it takes to run.

    06 Intimidator SS- Tuned, CAI -DD
    03 Silverado- Last incarnation 13.6... RIP
    Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
    "Seize the day like you seize your noodle" - Shin Chan

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    That's probably whats wrong with mine, why it dies when I come to a stop, dirty MAF. Now if I could just find where the MAF is I'd clean it. I don't have one! Crappy amateur tuner is whats wrong with mine. I can put it in Neutral when I come to a stop and it does just fine.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #3
    Join Date
    May 2008
    Location
    Crossett,Ar
    Posts
    2,382
    Its the answer for everything greg. Come on. Go buy one put it on your truck and clean it. Youll be set.
    Seriously I dont think mine has EVER been cleaned. Nore the TB

    06 Intimidator SS- Tuned, CAI -DD
    03 Silverado- Last incarnation 13.6... RIP
    Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
    "Seize the day like you seize your noodle" - Shin Chan

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Quote Originally Posted by Show&Go View Post
    Its the answer for everything greg. Come on. Go buy one put it on your truck and clean it. Youll be set.
    Seriously I dont think mine has EVER been cleaned. Nore the TB

    I've got one laying in my pile of spare/leftover parts. If I clean my MAF will my truck start idling better?
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Jan 2008
    Location
    Wasilla, AK
    Posts
    704
    Seems that there's a comedian in every bunch.
    2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.

  6. #6
    Join Date
    Jan 2008
    Location
    Wasilla, AK
    Posts
    704
    Quote Originally Posted by Show&Go View Post
    Dude I wonder if thats the problem with my truck. Mine only has a problem when the battery dies as well! Imma try it when I do my cam swap! If you just fixed my truck Ill actualy owe you guys one. Even though I am kinda stealing your thread. My friends always blaimed the tune... I always blaimed it on a bad ecu. But it would make sense if that was the real problem being how well it runs after it relearns the "adaptations" it takes to run.
    Why wait? Do it before your cam swap. Should cost you less than $10, only take you about 1/2 an hour.
    2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.

  7. #7
    Join Date
    May 2008
    Location
    Crossett,Ar
    Posts
    2,382
    Quote Originally Posted by AKlowriderZ71 View Post
    Why wait? Do it before your cam swap. Should cost you less than $10, only take you about 1/2 an hour.
    I haft to swap my TB anyway when I do that cam swap. Imma put on a TBSS intake manifold when I do it. so ya know. Y not just do it all at one time. I usually make sure someone is around me that knows more then I do.... If you only knew how well I can screw something up that should of been simple you would understand.

    06 Intimidator SS- Tuned, CAI -DD
    03 Silverado- Last incarnation 13.6... RIP
    Ls1, Pnp heads, Polluter camshaft, spray, 4k stall on the way
    "Seize the day like you seize your noodle" - Shin Chan

  8. #8
    Join Date
    Jan 2008
    Location
    Wasilla, AK
    Posts
    704
    Cool.
    2001 ECSB 4x4, 5.3, Radix, 3.0 pulley, VHP Trucker cam, 216/224 .551/.551 115 lsa, 1.8 Crane roller rockers, 4L65E, Yank SC3000, 3.73, Cal-Tracs, HPTuners.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts