Thanks for the compliments.

A little update, but no pictures...

Got the fuel system up & running. Has problems getting pressure, then figured I had the check valve in backwards!! Swapped it around, and 40 psi. A turn or 2 on the regulator, and 60 psi it is. Damn that A1000 is loud!

Got the harness mostly installed, just need to hook up the starter signal wire, fan harness, finish up the voltage & fuel gauges, plugs & wires, oil & trans coolers and driveshaft. I have everything but the plug wires & exhaust on hand. Thanks to Jon @ Nelson Performance for helping me with my harness!!