Forum: Powertrain

sup 02! what kind of mileage did you get with the cam you have now and the 4l60e. i'm looking into getting that one or the 212°/218° .522''/.529''...

hey yall whats the deal. 1 quick one for yall does anyone have or seen a b&m floor shifter installed in a nbs truck and if so what kind of shifter...

these are pics of the 80e and the exhaust that was just done. and a few others to boot. this is of the back of the tranny...

Ok, simple ? What do you set the tire pressure to and why ? Door placard says 35psi but that was for O.E.M. tire. Max pressure on new tires says...

I have a 2004 Avalanche Z71 (1500) with 3.73 gearing. I am looking at a 5900 lb travel trailer. The truck is rated at 7100 lbs. with the current...

hey guys whats up few questions for ya that th224 how much is the lift on that and to change the cam in a 6.0 can you change the springs with out...

for a 6.0. whats out there, has anyone on here had a good or bad experince with anyone. Looking to use this on a procharged 6.0. Thanks guys.....

i finally got the tranny in and took her out. i have no reverse right now but that should be fixed soon. bu the darn thing will not quit overheating....

The '02 Tahoe is acting up. Today, I got in, started it, put it in reverse to back out, no movement... Put it in Drive, moved a tad forward, put...

These are all the mods that are sitting in my garage waiting to be installed on my 5.3 rcsb. MTI C1 cam (222/222 .566/.566 112lsa) comp cams 918...

where the hell did they hide the '04 fuel filter at...it's not on the frame under the door or anywhere else that i could see under the truck.

Which are better, the Nitto, Mickey Thompson, or BF Goodrich Drag Radials?

I was just wondering why no one goes all the way and puts in an 8.1 Liter? If your truck is gonna be for racing why not drop as much engine in as...

Many moons ago I posted that my 03 1500HD's stock torque converter flashed stalled and brake stalled @ 2500rpms. Just reporting back in that my 05...

I have a 99 silverado with a 5.3 and I am looking at cold air intakes. I am having trouble choosing the one I want and am looking for some advice. ...

ok i put her in{by myself} --houston we have a problem. my converter bolts do not line up. as a matter of fact they are around a 3/8 inch off. here...

thanks for those responses but what about a built 4l60e vs stock what yall think :help:

I was looking at a couple of TCI trannys and was wondering why the 96 and below tranny's are one part number and the 97 adn above trannys are another...

from you guys how hard is it to do a cam swap on a lq9? how big can you go with stock springs? is it hard to change the springs? if i changed the...

Well for the last week or so my oil pressure has been running about 10 lbs lower than normal (about 60 lbs at 70-75mph). I changed the oil a couple...