Forum: Powertrain

Trying to find this intake I have seen on many Corvettes. Some of you may have seen it. It is a polished aluminum finish and has a filter on each...

Ok so i think this is going to be my next project once it gets warmer out but i was gonna ask you guys bout this first cause alot of you have done...

Dose it take away from the engine? I'm wondering if thats one of the reasons i'm getting bad gas mileage. I try getting on it with the heat on and...

Hey guys i swapped my 2006 4l60 out for a t56. my question is a guy i work with has a 95 k1500 with a 5.7. he has a 4l60 in it but its junk.. what is...

After my 2001 silverado 5.3 sits for awhile it will crank over and over and wont start till the second or third time I shut it off and restart it....

has anyone noticed a slightly rough running engine with ngk tr6 plugs? Im trying to decide if my slight shake at idle is normal. seems to be running...

I need a .dxf or .dwg file for a 5.3 header flange. Anyone?

got a friend ask me about some shocks, he has a stock height truck, ( not lowered) wanted some input on heavy duty rear and some good front shocks.....

ok all I am getting close to some upgrades to the 5.3 in my 68 SWB. I am going to do this on as much of a budget as I can but if course would like to...

Okay, bought a used 80e today to replace my old one. Thought I'd get you guys input and opinions. I bought this unit at a salvage yard. The dude...

i ordered a trans-go shift kit, vette servo and a 4th gear billet servo and i was wondering if i should put in the 4th gear servo. the reason for the...

I need a new motor for the hauler its an 01 3/4 ton flatbed whats the cheapest route? I dont carry lot of weight just big bulky junk it has a 6.0...

This 2000 Tahoe I just bought has no park brake. I can't believe I was stupid enough not to step on it when I test drove it. Oh well. My mechanic...

Im thinkin about going to 3.73 gears or If someone has a late model with 3.73s that mite want to swap rearends.I had the cover off today and changed...

Hey everyone, Has anyone ever used a good fuel injector cleaner? My truck now has 120,000 on it and I'm looking to do some kind of system cleaner....

For about a month now my truck wants to stay idling around 800-900 in the morning. Even after temp reaches 180 it will stay there till its put in...

im in the process of ordering gears and currently everything is stock in the rear end. My question is the stock a 10 bolt rear end or what?

Truck: '00 Silverado 4.8 Reg. Looking to get a brake kit for my truck, specifically a WilWood or Baer kit. With that said, and being very brake...

Well i had the coolant flushed at the local GM dealer, because it was 0 degrees outside, and i wasnt planning on freezing. They flushed it out and...