+ Reply to Thread
Results 1 to 9 of 9

Thread: Damn it was hot last night

  1. #1
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Went to DentonDragway again last night and the best time I could run all night was only 9.46

    I got to pound the crap out of tons of imports but got beat by a 350ZX.

    Ran a CHARGER R/T 5.7L Hemi and won 2 of 4 but lost one of them because my transmission shifted into 2nd gear while I was stalling it up and I ran the whole 1/8 mile in 2nd gear Good news was it only cost me .5 seconds on my ET.

    Got beat badly by a Volvo with an LT1 camaro engine under the hood. Got beat even worse by a 56 chevy two door post with a 532" Merlin big block. Can you imagine the feeling when you get beat by a full 3 seconds in only 1/8 mile? I shot the bull with him most of the night, he was a fellow Okie, nice older feller. When you're almost 42 there are less and less people you can call an older feller every year.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  2. #2
    Join Date
    May 2004
    Posts
    2,120
    Damn Greg, you're gonna have to kick it up a notch so we can put motoxlifer in his place. LOL He's got us with the weight difference though. I think it would be funny to have an ext cab with A/C take his numbers. LMAO!!


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  3. #3
    Join Date
    Oct 2005
    Location
    Houston, Tx
    Posts
    1,212
    nice!!

  4. #4
    Join Date
    Jan 2006
    Posts
    621
    Hey Nitrous you've gotta go to the strip so you can see if your faster or not first. Yall better do somerhing quick cuz I ain't gonna go any slower... till I break somethin. Ha! Ha! Hey Red did you remove your headlight? I don't know if it helped me or not but it couldn't have hurt in this hot ass weather

    [1/8 mile E.T. - 8.23 @ 82.86 mph w/1.82 60'] '98swb,4/6drop,20"RozziDeeps on 275/40ToyoProxes '98LS1/4L60E,TRCheaTR cam,Ported TB,Billet MAF ends,MSD8.5 superconductor wires,S&P midlengths,!EGR,!cats,2 1/2" true duals w/X-pipe,Dynomax Ultraflows,TCI 3000,billet servo,TCI deep aluminum pan,3.73's w/Auburn posi; Eclipse CD, Rockford 6 1/2's, Memphis 12's, Punch 200 ix, Punch 500x

  5. #5
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    I've got to get some cool air into the engine. With the tranny cooler, a/c cooler and radiator there is a lot of hot air going into my intake. It gets so hot you don't want to hang onto the aluminum intake hose for too long.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  6. #6
    Join Date
    Nov 2005
    Location
    ohio
    Posts
    1,712
    glad ya had fun RED, BTW , was that one of the volvos from the JTR swap manual??
    07 SILVERADO CLASSIC 2500 HD 4x4 CREW CAB LT3 DURAMAX LBZ/ALLISON 6 SPEED 5'' MBRP Turbo back exhaust 6'' TIP /NO CAT- NO MUFF/ AFE Intake/ EDGE HOT JUICE /MERCHANT AUTO STG III Built Allison/P I ConverterTTS Twin Lift Pumps. Tierod sleeves/Cognito braces.17x9 Moto metals_______ Old Truck ,04 Z-71/Turbocharged,/cam/stall/Zippy Built TRANS/Nelson Tuned------

  7. #7
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Probably not. He said he just completed the swap about 4 months ago.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  8. #8
    Join Date
    Jan 2006
    Posts
    621
    What's an A/C cooler? Is that a condenser? I still have my condenser too and a tranny cooler. It looks like your air filter is right where mine is. There is a big hole behind the headlight (I'm sure u already know) that will let fresh air flow right onto your air filter. I'm gonna box mine in eventually.

    [1/8 mile E.T. - 8.23 @ 82.86 mph w/1.82 60'] '98swb,4/6drop,20"RozziDeeps on 275/40ToyoProxes '98LS1/4L60E,TRCheaTR cam,Ported TB,Billet MAF ends,MSD8.5 superconductor wires,S&P midlengths,!EGR,!cats,2 1/2" true duals w/X-pipe,Dynomax Ultraflows,TCI 3000,billet servo,TCI deep aluminum pan,3.73's w/Auburn posi; Eclipse CD, Rockford 6 1/2's, Memphis 12's, Punch 200 ix, Punch 500x

  9. #9
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Yeah, I am going to get some aluminum sheet and box in that area for a cold air system. The headlight is a pain to remove since you have to pull the grill and four bolts to get the unit out. I don't think that little 3" hole is going to help much in mine. I plan on pulling air from the road, maybe through the fender well with some sort of air diversion.

    Yeah, the a/c cooler is the condenser.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts