+ Reply to Thread
Page 1 of 3 1 2 3 LastLast
Results 1 to 10 of 27

Thread: 2001 6.0L

Hybrid View

  1. #1
    Join Date
    Mar 2003
    Location
    San Antonio, TX
    Posts
    11,038
    Hey Guys,
    I just picked up a complete, very low mile 6.0L.
    Comes complete, minus engine harness and PCM.
    It also incluldes all the a/c stuff, lines, dryer, compressor.
    All front accessories, belts, intake cover, complete intake.
    Includes manifolds as well.
    It also has all the bell housing bolts, exhaust studs and ground straps.

    I personally helped pull this engine from a wrecked 2001 HD and it had just a tad under 20K miles.

    I'll start it up this week to confirm everything is operational.

    asking $1850.

    thanks,
    allen

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Sounds like a bargain to me. Too bad it doesn't have an aluminum block or it might have ended up in my POS. Deals like that never are available when I'm seriously looking for one. Someone's going to get a hell of a deal there.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #3
    <div class='quotetop'>QUOTE(RedHeartbeat &#064; Jun 26 2006, 11&#58;21 AM) [snapback]56322[/snapback]</div>
    Sounds like a bargain to me. Too bad it doesn&#39;t have an aluminum block or it might have ended up in my POS. Deals like that never are available when I&#39;m seriously looking for one. Someone&#39;s going to get a hell of a deal there.
    [/b]
    I got a can of silver paint... just tell people its not iron.
    38" swampers, 350 tbi, 14 bolt rear, 10 bolt front

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    <div class='quotetop'>QUOTE(hummertech &#064; Jun 26 2006, 03&#58;12 PM) [snapback]56325[/snapback]</div>
    I got a can of silver paint... just tell people its not iron.
    [/b]

    I would but time slips never lie. 100 lbs = .100 additional time at the finish line.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    <div class='quotetop'>QUOTE(RedHeartbeat &#064; Jun 26 2006, 01&#58;37 PM) [snapback]56333[/snapback]</div>
    I would but time slips never lie. 100 lbs = .100 additional time at the finish line.
    [/b]
    i went on a diet and lost 70lbs, i am going for another 50lbs before sept. does that count???
    38" swampers, 350 tbi, 14 bolt rear, 10 bolt front

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    <div class='quotetop'>QUOTE(hummertech &#064; Jul 7 2006, 12&#58;27 AM) [snapback]57316[/snapback]</div>
    i went on a diet and lost 70lbs, i am going for another 50lbs before sept. does that count???
    [/b]
    You might live long enough to go the the track.

    Congrats on the weight loss. Sounds like you just cut .07 off of your 1/4 mile times.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    Oct 2005
    Location
    Houston, Tx
    Posts
    1,212
    good find

  8. #8
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    <div class='quotetop'>QUOTE(farmtruc &#064; Jun 26 2006, 12&#58;33 PM) [snapback]56321[/snapback]</div>
    Hey Guys,
    I just picked up a complete, very low mile 6.0L.
    Comes complete, minus engine harness and PCM.
    It also incluldes all the a/c stuff, lines, dryer, compressor.
    All front accessories, belts, intake cover, complete intake.
    Includes manifolds as well.
    It also has all the bell housing bolts, exhaust studs and ground straps.

    I personally helped pull this engine from a wrecked 2001 HD and it had just a tad under 20K miles.

    I&#39;ll start it up this week to confirm everything is operational.

    asking &#036;1850.

    thanks,
    allen
    [/b]
    Trade for 5 stickers?

  9. #9
    Join Date
    Jun 2006
    Posts
    13
    Man that&#39;s a sweet deal...I wish I had the funds right now.


    Good luck selling it&#33;
    http://img409.imageshack.us/img409/8...rucksig0vt.jpg
    2006 RCSB 5.3l Silverado *bone stock*

  10. #10
    Join Date
    Oct 2003
    Location
    Houston
    Posts
    209
    How would that motor work with a 99 V6, would i need a new computer and harness???
    99 Pewter SCSB
    DJM 4/6 drop, Hotchkis front/reat swaybars,Hypertech power programer, milled & built heads, Accel wires, distributer,coil, Mass Air Flow Sensor(mti motor sports, Granatelli),Dynomax UltraFlow Stainless, 17x8.5 Eagle Alloys, Escalade door handles, Suburban front grille, with clear corners and billet bowtie,Street Scene mirrors, Cowl Hood

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts