+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 14

Thread: Denton Dragway results

  1. #1
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Went to the track and ran my best times yet...

    8.498 @ 81.88 with a 1.97 60'


    I made 5 other passes but the track was junk that evening. A brand new Z06 was nearly totaled when a dumbass Lexus w/a turbo slammed on his brakes at the finish line and lost control. Then a guy in an S10-V8 lost traction and was all over the track in front of me. I wasted 4 out of 6 runs due to things out of my control. Hell, I took off at the light and spun so hard the speedometer showed over 80mph!! Humidity was our enemy.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  2. #2
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    8.49...hell thats a good 1/8 run red...congrats...
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  3. #3
    Join Date
    Dec 2005
    Location
    Dallas, TX
    Posts
    511
    Damn good run!!
    2001 GMC Sierra C3 with the 6.0! Vararam King Cobra, TB bypass, No cats with two 3 inch cut outs and thats it for the motor. FOR NOW ATLEAST!!
    9.5 in the 8 mile

    6000K xrtalight h.i.d kit


  4. #4
    Join Date
    Nov 2005
    Location
    ohio
    Posts
    1,712
    nice #s red! Damn people need to learn car control!!
    07 SILVERADO CLASSIC 2500 HD 4x4 CREW CAB LT3 DURAMAX LBZ/ALLISON 6 SPEED 5'' MBRP Turbo back exhaust 6'' TIP /NO CAT- NO MUFF/ AFE Intake/ EDGE HOT JUICE /MERCHANT AUTO STG III Built Allison/P I ConverterTTS Twin Lift Pumps. Tierod sleeves/Cognito braces.17x9 Moto metals_______ Old Truck ,04 Z-71/Turbocharged,/cam/stall/Zippy Built TRANS/Nelson Tuned------

  5. #5
    Join Date
    Dec 2003
    Location
    Azle,TX
    Posts
    3,682
    Cant wait to see it ! Me and the family are going to try to come up next friday
    Vortec Performance Tuned
    LQ9 built 4L60 LTs and a billion miles on the speedo!

  6. #6
    Join Date
    May 2004
    Posts
    2,120
    Humidity, you ought to try living down here by the coast! Somertime sucks! Unless your at the beach checking out the butt floss.

    Hey Greg, I have a friend that said he was gonna take his truck out there sometime. His name is Nick and he's the shop supervisor at one of the Chevy Dealerships by you. He put an LS1 in his 97 Chevy and he said he's got an LS2 in the garage. Damn the benefits you get working at a dealership. I'll try to put him in contact with you.


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  7. #7
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Awesome. Now I just need to figure out how to get that LS2 out of his garage into mine.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  8. #8
    Join Date
    Jan 2006
    Posts
    621
    Sweet times Red! I guess you got your problem fixed. What was it?

    [1/8 mile E.T. - 8.23 @ 82.86 mph w/1.82 60'] '98swb,4/6drop,20"RozziDeeps on 275/40ToyoProxes '98LS1/4L60E,TRCheaTR cam,Ported TB,Billet MAF ends,MSD8.5 superconductor wires,S&P midlengths,!EGR,!cats,2 1/2" true duals w/X-pipe,Dynomax Ultraflows,TCI 3000,billet servo,TCI deep aluminum pan,3.73's w/Auburn posi; Eclipse CD, Rockford 6 1/2's, Memphis 12's, Punch 200 ix, Punch 500x

  9. #9
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Not enough engine. Needed some help to get the times down. I hear that the 98 LS1 was only supposed to have about 310HP. Maybe I need some better heads and exhaust.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  10. #10
    Join Date
    Jan 2006
    Posts
    621
    Is that what your sayin?

    [1/8 mile E.T. - 8.23 @ 82.86 mph w/1.82 60'] '98swb,4/6drop,20"RozziDeeps on 275/40ToyoProxes '98LS1/4L60E,TRCheaTR cam,Ported TB,Billet MAF ends,MSD8.5 superconductor wires,S&P midlengths,!EGR,!cats,2 1/2" true duals w/X-pipe,Dynomax Ultraflows,TCI 3000,billet servo,TCI deep aluminum pan,3.73's w/Auburn posi; Eclipse CD, Rockford 6 1/2's, Memphis 12's, Punch 200 ix, Punch 500x

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts