Interesting reading

[RedHeartbeat]

How to Degree the LS1 camshaft

500+ hp 408 build up

Twin Turbo LS1

Comp Cams valvetrain configuration

LS1 Intake comparisons

FAST Intake upgrade for LS1

More FAST Intake reading

Lincoln Tech 12 sec LS1 Camaro part 2

AFR Heads and Comp cam in a LS1

427 Cubic Inch LSx buildup

LS1 comparing three Comp cams

533 HP LSx

How-to LS1 cam swap

How to make 400+ RWHP with an LS1

Inside the LS7

More LS7 stuff

STS turbo F-body install

More STS turbo F-bodies

Carbureting the LSx Engine

Gen IV Displacement on Demand

F-body LS1 MAF & Headers upgrade

Wiring the Gen3 engine in a conversion

6-71 8-71 blower drive kits

Crate LS2 install

More LS2 articles

Another LS1 Carb swap

HPTuner / Silverado

Crane valvetrain kit and a really cool valve spring compressor

Nitrous Express 723 HP install

Swapping an LS1 into an older vehicle

SS Silverado vs C1500 comparison

LS1 Hop ups

Nitrous controller

22 HP for $220

The interchangeable LS1

427 ci S-15 pickup

Lingenfelter C1500 buildup

Fast Intake w/NOS

NOS F-body vs NOS GTO

LSx Head Buyers Guide

Head buyers guide

AFR's 205CC Heads Gain 37hp On Stock LS1

The Unauthorized Biography Of GM's Stillborn Gen III V-10

A procharger blown LS1

GTO supercharged part 5

GTO supercharged part 4

Part I: Procharger Gets Our Project LS1 TA Blown

How To: Properly Install And Degree An LS1 Cam And Timing Set

GTO supercharged part 3

Installing Long Tube headers

Is the 405 hp claim for real in the C5?

Inside the LS2 engine

LS1 Electric water pump install

4L60E High Performance beef up

TH200R-4 BUILDUP

MTI Power buildup - Heads

MTI power buildup - Block

Free mods - do not remove MAF screen!!!!

Nitrous Righteous

LS2 Dyno Flog

LS1 block basics

TURBOS

TURBOS part 2

TURBOS part 3

450ci C5R

F-body headers and ypipe

400 hp LS1

More about the LS1

LS2 powered Colorado

[NITROUS]

Those are some good articles. Thanks for the reading RHB!

[NITROUS]

Have you read the cam guide from LS1Tech that was put together? It has some useful info on camshafts, springs and other stuff.

[RedHeartbeat]

Nope, can't recall reading that one. I may have though. I thought I'd link a few things for the newbies.

[1slow01z71]

Hmm the 408 build is interesting. They made 560hp and 540tq with a low compression 408 with a cam a little bigger than mine but with less cubes and inferior heads. Looks like Im going to get my 500rwhp N/A with the 418

Good stuff red Ill read all the rest when im bored one day.