Ok guys here it is my swap.

starting out with a 4.3 v6. in a 1998 chevy rcsb. goal is to get a 6.0 and 80e tranny in the truck.
All the parts i have:
•2006 lq9 6.0 with computer and wiring harness and a 2007 4l80e
•v8 motor mounts i got from O'Reilly's auto part store, made by ANCHOR part # 2621
•Motor mount lsx conversion plates from ebay.
•Motor mount cups from gm part # 15719194
•U joint to make the 80e fit on my stock drive shaft from summit racing. part number 447
•In tank fuel pump from nelson performance.
•Edelbrock shorty headers.
Parts im getting this weekend from O'Reilly's
•WIX corvette fuel filter
•fuel line
•Tranny fluid
•fuel line connectors
Parts i will get next week
•if needed fab up a new cross member for the tranny
•Exhaust system
•tranny lines
•LS1 Efans from Nelson Performance
•LS1 Efan wiring harness from Nelson Performance
•Mail order Tune from Nelson Performance
•intake kit : maybe
•spark plugs : maybe
•spark plug wires : maybe

I will post all of my pics, problems, and questions here.

here is my first one haha
has anyone ever swapped a drive by cable to drive by wire?
i have the pedal and module for the wire set up. i looked at my stock pedal and the new one they don't look anything alike.