+ Reply to Thread
Results 1 to 9 of 9

Thread: 13's

Hybrid View

  1. #1
    Join Date
    Dec 2007
    Posts
    133

    13's

    hey guys new here from the baytown areaawsome site by the way.I drive a 99 ex cab with a 5.3 the only mods i have right now are a 2/4 drop,no cats,and a magnaflow muffler dumped, besides using nitrous what will it take to get into the 13's in the 1/4? thanks

  2. #2
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    A tune, headers, torque converter, and a cam will get you mid- to low-14's. You'll probably need some spray to get you there though. Just depends - all trucks run a little different.

  3. #3
    Join Date
    Dec 2006
    Posts
    4,033
    come on damnyankee give the guy some hope !!!!!!!!!!! remember ap2002 broke into the 13s with just cam !!! on stock motor. now him and txsilverado have went low into the 12 with full bolt ons _ and me next lol once i get my tranny fixed once again!!!!
    Simple: 408 on steroids!
    single digits coming soon!

  4. #4
    Join Date
    Mar 2006
    Location
    Mesquite
    Posts
    8,176
    yeah....all depends on the truck...

  5. #5
    Join Date
    Dec 2006
    Posts
    4,033
    Quote Originally Posted by DamnYankee View Post
    yeah....all depends on the truck...
    yes sir!!!!!! and those trucks mentioned are some awesome TRUCKS!!!!



    but then again youre right not all trucks perform the same !!!!!!!!!!!!! damn thats the down side lol
    Simple: 408 on steroids!
    single digits coming soon!

  6. #6
    Join Date
    Dec 2007
    Posts
    133
    ya i plan on spraying the truck eventually i just wanted to get a few opinions on what it would take all motor first....

  7. #7
    Join Date
    Dec 2005
    Location
    Highlands, Tx
    Posts
    387
    Randy, a lil off topic, but you know where i can get the parts for a 2/4 drop?
    http://img.photobucket.com/albums/v355/agrv8d/AGRV8D1-1.jpg
    Surgeon General never said anything about smokin' Fords.
    www.fquick.com/AGRV8D

  8. #8
    Join Date
    Aug 2007
    Posts
    1,105
    Quote Originally Posted by AGRV8D View Post
    Randy, a lil off topic, but you know where i can get the parts for a 2/4 drop?
    stylinconcepts
    2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!

    Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
    CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
    Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors

  9. #9
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Trick Turbo with a NelsonPerformance install and tune. Check them out on the site sponsorship.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts