Hi, I'm not new to this site, but just became a member! I've gotten a lot of good info from here, I'm currently installing a 6.0/4L80E into an '86 Silvy and you guys have been a ton of knowledge. I started it a couple of weeks ago, but still working out the bugs and drove it out of the shop last night. Got to get it to the muffler shop so I can get on the road!!!!
It's about time we made an honest person out of you!
Welcome
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Yeah, this is a really great place to get info/help when you live in a small town where there isn't a lot of shops doing the LSX thing.
Hey Dave--Welcome! Yeah, it is tough to find people to know stuff about LSX motors when you live so far out... But it sounds like you have enough mechanical sense to get it all done by yourself! You plan on modding the 6.0L?
2000 ECSB 6.0L
TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's
It's in the plan,want to see what it will do stock. All it has is a tune, a K&N and duals. The first problem is the stock gear is to high but that's a cheap fix. My goal is to out run my son's 99 T/A that's running 8's in the 1/8. in order to do that I know there will be MODS!!
harleydave,
what headers/exhaust manifolds you running?
Welcome to the site!
Her name is A Meli-
"If everything is under control, you are going too slow."- MA
Thanks, Oscar made them they are some modified Camaro ones they fit well and they look good for manifolds.
Posting Permissions
Reply With Quote
