+ Reply to Thread
Page 1 of 2 1 2 LastLast
Results 1 to 10 of 20

Thread: Tbss boltons H/C

  1. #1
    Join Date
    Nov 2006
    Location
    DALLAS
    Posts
    181
    GANGSTA RACING

  2. #2
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Who's dyno did you run on? BIG NUMBERS!!
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  3. #3
    Join Date
    Nov 2006
    Location
    DALLAS
    Posts
    181
    dont know the location,big numbers(did u mean that it is to high for what i have???)
    GANGSTA RACING

  4. #4
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Those are huge numbers for a 6.0L engine. What is the factory rating on that engine 345 HP?

    For RWHP that is astronimical. I wonder if they add the correction factor to the output.

    Does it have the 395 HP that the 2007 engines have?
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  5. #5
    Join Date
    Nov 2006
    Location
    DALLAS
    Posts
    181
    Its the LS2 motor(395hp).Its right were it should be with the mods i have.
    GANGSTA RACING

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    I've seen your TB run. I know it's got the power. That's over 500HP at the crank. What all have you done to the engine to gain over 100HP? You've put together a very good combination.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    Nov 2006
    Location
    DALLAS
    Posts
    181
    tune,intake,udpullies,headers,efans,3600stall,ling y heads, 224/230
    GANGSTA RACING

  8. #8
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Nice heads will do the trick every time. How much do the TBs weigh? What are going to do next? NOS since everyone already thinks you're doing it anyway? They'd really crap their drawers if you dropped a couple more 10ths with a little spray.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  9. #9
    Join Date
    Nov 2006
    Location
    Plano, TX
    Posts
    230
    Can't wait to hear/see it.

    Mr. P.

  10. #10
    Join Date
    Aug 2005
    Location
    Spring, Texas
    Posts
    527
    Impressive Pedro, I might have to start tinkering with mine after i get through blowin money on my truck!
    06 TrailBlazer SS LS2 4.10's

    02 SC StepSide Factory Orange
    Full Bolt-On 370 - Little Cam- Victor Jr Intake -Worked 5.3 Heads - 4.56's - Built 60E - Circle D 4000

    07 CTS-V CAI, GM Performance Exhaust, Ported TB, Coil Overs

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts