so i just ordered my 100 shot nitrous, but now i need to find a cam, but i dont really know anything about them. i know someone who is selling a stock ls6 cam wit about 50k miles. i dont know if i want that one, or look for a new one...any suggestions for cams?
1999 Silverado...Asp underdrive pulleys, heddman headers, k&n cold air intake, nelson tune, exhaust e-cutouts, Custom center console that holds a 7" tv...2 10" apline type R...2 5.24 extreme speakers... 2 rockford caps...extreme 800 mono amp, extreme 400 watt amp...waiting on the JUICE
i don't know about nitrous specific but i just installed a comp 269hr and absolutely love it. nice little lope at idle, and great mid range power. i have a procharger too and it works great with it.
the specs are 216-220 .525 .530 114
2008 Trailblazer SS LS2, K&N CAI, flowmaster 40 series, hp tuned
2004 Trailblazer 4.2, K&N CAI, hp tuned
2002 Camaro Z28 5.7 ls1, lid, slp loudmouth, bbk longtube headers, ory, hp tuned, tr224 cam, ported 243 heads, moser 12 bolt w/ 3.73's and full spool, and a 100 shot just in case. 463whp, 458 wtq 11.32@ 120 1.52 60' on motor no spray times yet
the cam he mentioned above will work fine with nitous as well as the LS6 cam.
Just a little FYI. We had a customer with a Formula (Trans Am) and we did an LS6 cam, lid, tune, and a 150 shot and he ran 7.0 in the 1/8. That car had stock manifolds, cats, 2:73's, stock stall. It is a little of a freak, but the LS6 cam will work great with 100 shot as well as N/A.
'92 GMC reg. cab, step side. 7.32@ 92.3. SOLD
http://videos.streetfire.net/video/d...d700c6401f.htm
New project: '00 S-10 ext. cab, ZQ8, 370, T-56, daily driver.
Same cam I have and i love it...good street manners and a little choppy.Originally Posted by the_jester
Vortec Performance Tuned
LQ9 built 4L60 LTs and a billion miles on the speedo!
You also have to decide if you want all your power on the bottle, or more of an all around power, N/A, and when you spray. If you want to get the most out of your nitrous you should look for a good nitrous cam, but it wont be as wicked when your not spraying.
I have a cam that was designed for nitrous use for sale. It's a 232/236 .614 .597 113.
I also have a TR 224 114LSA for sale.
Either way you go for N2O you'll want the LSA to be atleast 133 or wider. Thunder Racing has some real nice N2O cams spec'd out right off the shelf.
2004 Silverado SS
ok thanks guys im probably gonna go with the 269hr cam..
so does sprayin sqeeze come with any prolonged affects on the motor? and what is the diff between that and meth inj.?
2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!
Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors
with NOS you can add more fuel to the mixture since you're adding more oxygen. The whole trick to making more power is getting more fuel, oxygen and spark into the cylinders. Thats essentially what you're doing when you put in a bigger cam, helping it breathe better to move more fuel and oxygen through the combustion process.
The stress begins on the bearings in the rotating assembly due to the additional HP created. Staying under 600 total HP seems to be the key with stock GM parts with any power adder.
Last edited by RedHeartbeat; 11-25-2007 at 11:58 AM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
i see
2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!
Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors
Posting Permissions
Reply With Quote
