The light blue/black stripe wire goes to your speedometerOriginally Posted by slow94
The light blue goes to the guage.
The red/white stripe wire goes to your cruise box (if you're using cable throttle, you'll need this hooked up, if drive-by-wire you dontl
Brown c9 is fused power feed for the drac buffer box (just leave alone)
Brown c13 is trans output speed to the tbi pcm (not needed)
Black/white stripe is ground for the drac buffer (just leave alone)
Dark blue goes to the Tbi pcm (not needed)
Purple and green are the vss input wires from the old tbi harness (not needed)
Thats all I can get from my Chiltons.
On my first 94 swap I used a dbw setup and just hooked into the light blue wire. The 94 I'm working on now is a cable throttle, so I spliced the light blue and the red/white wire into the green wire from the lq4 pcm, its not finished yet to tell if cruise will work though.
Reply With Quote