-
http://www.the12volt.com/12voltimages/pos2neg.gif
You would hook the 12v output(that went to the tbi pcm) from the transfer case into pin 86, when activated this will apply a ground to pin 87 on the relay, you hook that straight into the lq4 pcm pin 16. Sorry, im on my tablet and its hard to type out long messages.
Last edited by slow94; 08-01-2013 at 11:10 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
Forum Rules
Reply With Quote