You must have had an 80E. I had to do that to run my own home built headers when i switched from a 60E to an 80E, cut the ear off the driver side of the trans bell housing.
You must have had an 80E. I had to do that to run my own home built headers when i switched from a 60E to an 80E, cut the ear off the driver side of the trans bell housing.
Yup simple fix. Home made weight reduction kitOriginally Posted by RedHeartbeat
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
Posting Permissions
Reply With Quote