Doesnt look like I am going to be mounting the ECM inside the truck...just not enough room. Theres 2 things I could do to possibly make it work and thats either shove it under the passenger seat (which it wont fit good because the wires wont be long enough, or cut the fins off the ecm and see if it will fit in the dash then. So I think Ill just put it where my stock batt was. And I am still stuck on my VSS connector. I still have an extra one left and I can not find any left over plugs on the tranny or xfer case. I have the front one on the tranny plugged in and I looked all over for where I plug the second vss in and I cant find anything. Theres nothing on the tranny and nothing on the xfer case (besides the 2 plugs that my old harness plugs into)