got a lil delivery today..-6An fittings braided hose and fittings to connect to the trans case. also got my suspension..pro thane full polyurethane bushings! tomorrow i will hook up my new trans cooler lines. unfortunately the cooler on my truck doesn't have a screw on fitting to attach the hose so clamps it is!
96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /
http://www.ls1truck.com/forums/lsx-t...ders-pics.html
Here's to new parts!
1969 Chevy RCLB C10 350/TH400 SOLD
2007 Chevy RCSB 4.8 4x4 LS SOLD
2008 Chevy RCSB 5.3 4x4 LT SOLD
2010 Chevy CCSB 6.2 4x4 LT SOLD
2005 GMC CCLB DRW 6.6 Duramax 4x4 191,000 and counting
2013 FORD CCSB F350 6.7 Powerstroke 4x4
cheers!!!Originally Posted by pl4yboy
Here's to new parts!
96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /
http://www.ls1truck.com/forums/lsx-t...ders-pics.html
so i was able to hook up the new trans cooler today. braided hose lines were somewhat easy. just gotta be careful with the extra steel stickin out it will get ya fingers!
old leaky lines
removed clips and pulled out old lines
removed old fittings
old fittings vs. new fittings
got the new fittings screwed in
heres the trans cooler..
old lines
got the n fittings attached to the hose after some bloodshed lol
hopefully this doesnt leak..probably upgrad this later to one with the correct fittings
lines look pretty good in there
here they are connected
hopefully these things dont leak. i took off all the wiring so i couldnt fire it up..gotta figure out how to get the transmission to align on the crossmember its a PITA with only one jack. damn adjustable mounts!
Last edited by myzterray; 03-15-2012 at 08:04 PM.
96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /
http://www.ls1truck.com/forums/lsx-t...ders-pics.html
I have a few questions about your harness. Im working on my old harness right now and cant find exactly where the 4x4 harness ties into the engine harness...it seems as its basically a "standalone" harness. I need to put the 4x4 harness in with my nelson harness. If you have any tips lemme know!
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
I haven't paid much attention to the 4x4 part of the harness because I'm probably doing away with the 4x4 anyway.
No good! Lol thanks anyway. Maybe someone else will know that reads this. I just need to know where to tie in the 4x4 harness into the new standalone harness from nelson
Silverado Z71 10" Lift COMPLETE 6.0/4L80E PRC 2.5 Ported LS6 Heads 228r Comp Cam 3200 CIRCLE D Stall LS7 Lifters ARP Bolts SLP Oil Pump and Double Timing Chain 160 T-Stat 3" SLP Loudmouth Electric Cutout Walbro 255 Pacesetter Longtubes MSD Starter NELSON Harmess NELSON Street/Strip Tuned ECM MSD Wires LS1 Throttle Body Braided Lines Spectre CAI 4.56 Gears Detroit Locker 14 bolt http://www.ls1truck.com/forums/lsx-t...wap-build.html
I would imagine that you would have to tell Nelson that it was a 4X and then the harness would be marked. Either that or it would come as part of the harness.
would suggest call nelson and ask them. pretty sure someone there can help.
96 2 Door Tahoe 4wd / 5.3 Swap / CAI / Tune / Pacesetter LTs / Magnaflow / LED Dash / Novak A/C Bracket /
http://www.ls1truck.com/forums/lsx-t...ders-pics.html
Posting Permissions
Reply With Quote
