Intake is on and bolted down. Now I am working on plumbing for the tranny and fuel. I could use some help for both. Right now I have stainless braided fuel lines all the way from the tank to the motor, I just need to know how to connect the main feed to the rail using what fittings.

For the tranny: I would like to convert to the stainless braided lines just because they are so easy to manuver around ( NO I do not want to use black rubber hydraulic hose lol). I was looking on summit and found these http://www.summitracing.com/parts/RUS-640520/ but I am not sure if they will fit and what else to use to connect those to the braided lines.
So I would need the following: 2 fittings to screw into the trans case, 2 fittings to connect the hose to the trans case fittings, 2 sections of hose, 1fitting to screw into my radiator, and 1 fitting to connect the hose to my radiator fitting. ( I am using a trans cooler so there is only 1 line going through the trans)