Sub for my rcsb

[pl4yboy]

find someone with a probox near you and listen, it will smack you so hard you will pull the cash out and buy it off them. i hit 137.5 on my dash for a solid 2 years, i loved it but wanted legroom more than bass(i'm a bigger guy), but any properly setup ported system will work.

I hit 153.8 on my dash with a single 9512... =)

My next setup will be two 8s. Yes I said it. TWO 8" 1508s. Probably in a very small ported enclosure under or behind the rear seat in my crew cab. I bet you money it surprises people.

[Mf2racer]

I hit 153.8 on my dash with a single 9512... =)

My next setup will be two 8s. Yes I said it. TWO 8" 1508s. Probably in a very small ported enclosure under or behind the rear seat in my crew cab. I bet you money it surprises people.

Not to thread jack ,but Justin was this in your regular cab truck? If so what were your box specs? and were did you put it? any pics?

[pl4yboy]

Not to thread jack ,but Justin was this in your regular cab truck? If so what were your box specs? and were did you put it? any pics?

It was "A" regular cab truck. It was a 1969 Chevy c/10. It was built as a center console (I know that isn't legal in comps). I only have a picture of the LOUD box, not the fiberglass one.



This particular box's specs were 3.2ft^3 @ 48 hz. This was the box that metered 153.8. The daily box was a 2.5ft^2 @ 32 hz.

[sierraman]

My next setup will be two 8s. Yes I said it. TWO 8" 1508s.

i heard a system with 4 8"s and it blew my mind how clear and precise the notes were. what brand are those 1508's?

[pl4yboy]

Digital Designs.

[TATERNATOR]

What you going to do with the 12 Justin?

[pl4yboy]

What you going to do with the 12 Justin?

I have no use for it. Buy it.

[Maui4x4]

Dude Justin that is a solid box, is that really a down fire design and how many watts were you using to power it? Heres my old 12" L7 setup, 3 cubic ft bamboo decorated box @ 29hz and 750wts. Yeah some people dont like square subs but they have potential when tuned.

[pl4yboy]

[QUOTE=Maui4x4;404831]Dude Justin that is a solid box, is that really a down fire design and how many watts were you using to power it?


It was an inverse mounted forward firing box with a 6" aero port. It was on a KX2500.1 that bench pressed 2880 @ 2 ohms.

The sub was a custom order Digital Designs 9512 with dual 1 ohm coils. $720