Custom mounted gauge pictures

[Jordan836]

Awesome that looks alot easier than I thought. Now the aeroforce interceptor plugs in to the OBDII port im assuming I have to run the wire from the OBDII up the A pillar and up into the headliner and over to the console right? I read somewhere that the pillar it self just pulls off correct? And any idea if its going to be a pain to get the wire from the OBDII up into the pillar to run it up to the headliner?

[408.Luke]

yes, yes, and just be carefule runnig the plug

[pl4yboy]

Awesome that looks alot easier than I thought. Now the aeroforce interceptor plugs in to the OBDII port im assuming I have to run the wire from the OBDII up the A pillar and up into the headliner and over to the console right? I read somewhere that the pillar it self just pulls off correct? And any idea if its going to be a pain to get the wire from the OBDII up into the pillar to run it up to the headliner?

Pulling the A-pillar is cake. No problem at all. Just use Luke's coathanger method and you should be good to go.

[Jordan836]

Ya it seems really easy. Thanks for the help Ill try to get some pics up when its all finnished

[jetmech]

http://www.ls1truck.com/forums/attac...achmentid=3581

http://www.ls1truck.com/forums/attac...achmentid=3580

[sierraman]

i think mitch has the best mount

http://www.ls1truck.com/forums/pics-...gauge-pod.html

[pl4yboy]

i think mitch has the best mount

http://www.ls1truck.com/forums/pics-...gauge-pod.html

I wish I had my old phone. I could show you one almost as bad. I got mine right after Mitch and I took a piece of 3M double stick and stuck it on top of my steering column. It actually stuck to the guage bezel so it didn't look like ass.

[nickpc82]

If you only have one gauge you can try this. http://www.ttspowersystems.com/GM_Gauge_Mount.html

[bangbangskeetskeet]

I always liked this but not sure if they are still making them or not.