you cannot put an LS1 style converter on a non-LS1 transmission, IIRC because the input style is different. The older style has a small, about 3/8", guide. The LS1 style has a blunt end on the input shaft.
you cannot put an LS1 style converter on a non-LS1 transmission, IIRC because the input style is different. The older style has a small, about 3/8", guide. The LS1 style has a blunt end on the input shaft.
Last edited by RedHeartbeat; 09-30-2010 at 11:48 PM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Originally Posted by RedHeartbeat
I'm really confused. OP has a 4l60e, the thread I'm talking about http://www.ls1truck.com/forums/sale-...ns-cooler.html also has 4l60e
blown transmissions are about as useful as 97% of the guys on this forum
Posting Permissions
Reply With Quote
