FS Nelson Performance custom grind cam

[Frenchy]

How many miles did you put on it Ricky? And how much lift?

[GraniteBlueNNBS]

What cam you running now Ricky???

[ChevyLee]

How many miles did you put on it Ricky? And how much lift?

The cam has about a total of 6,500 miles on it, I just put it in Jan of 2010 and purchased it with less then 2k miles on it. Lift is .588/.591

[farmtruc]

Same cam i have in the GTO, probably one of the best cams out for the 6L. I bet it'd do awesome in a 5.3L as well, or a 4.8L that wanted to be crazy!

[bk_cauley]

how would it act on a turbo 5.3?

[farmtruc]

how would it act on a turbo 5.3?

this was such a popular cam for us to install when the GTO came out that a lot of guys chose this cam, then later decided on a tvs,112,aps turbo setup, but didn't change the cam.
so, to answer your question, it worked pretty good in a FI application. The last gto we did had this cam, 8psi and headers, laid down a respectable 590hp in the end.

the aps gto we did had this cam as well, and it was stronger than the aps, but we never dyno'd it.

[TurboMic]

this was such a popular cam for us to install when the GTO came out that a lot of guys chose this cam, then later decided on a tvs,112,aps turbo setup, but didn't change the cam.
so, to answer your question, it worked pretty good in a FI application. The last gto we did had this cam, 8psi and headers, laid down a respectable 590hp in the end.

the aps gto we did had this cam as well, and it was stronger than the aps, but we never dyno'd it.

would this be a good cam for the escalade?

[farmtruc]

would this be a good cam for the escalade?

i wouldn't be scared to put it in a big truck, i'd do it.
it'll definitely wake up the mid range and topend for sure!!!!

in my gto, it has plenty of lowend as well, but it's a tad lighter, but not much lol, heavy ass gto hahha