+ Reply to Thread
Page 5 of 9 FirstFirst ... 3 4 5 6 7 ... LastLast
Results 41 to 50 of 89

Thread: Feeler: 1994 ext cab 1500 w/ 2002 5.3/4l60E installed - Central Florida

  1. #41
    Join Date
    Jun 2009
    Location
    Cocoa, FL
    Posts
    135
    yeah, that is no problem. it wont take me long to pull the stuff out to take pics, plus I can just put it back in when I am done lol.

    most of it doesnt belong to the truck, or even need to be in it, but it is easier to leave it in the truck until I get my shed's squared away lol.

  2. #42
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    Earlier I started thinkin bout what this truck needs and I came up with some questions...

    Quote Originally Posted by SpecV44 View Post
    ...then the gauges need wired and the 1 wire for the TCC lockup.
    So these aren't hooked up right now?
    Are the speedo output and volt meter wires still in the 02 harness?
    Are the coolant temp and oil pressure wires still left from the 94 harness?
    The fuel gauge wiring was left untampered with right?
    Is the AC hooked up and working?

  3. #43
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    My 57 sold. You still there?

  4. #44
    Join Date
    Jun 2009
    Location
    Cocoa, FL
    Posts
    135
    sorry bro, didnt get a chance to get pics today, pulled the motor out of my race car, installed power inverter in my trans am and then went out to tune the trans am.

    tomorrow morning i will get pictures of the outside and a video of it running, I wont have time in the morning to take the stuff out of the inside and take pictures of it, but I should be home about 5pm from the drag strip, so I can do it as soon as I get home. I will upload the exterior/underhood stuff in the morning and will take care of the interior afterwords.

  5. #45
    Join Date
    Jun 2009
    Location
    Cocoa, FL
    Posts
    135
    Quote Originally Posted by flattopwill View Post
    Earlier I started thinkin bout what this truck needs and I came up with some questions...



    So these aren't hooked up right now?
    Are the speedo output and volt meter wires still in the 02 harness?
    Are the coolant temp and oil pressure wires still left from the 94 harness?
    The fuel gauge wiring was left untampered with right?
    Is the AC hooked up and working?

    Speedo output is there, not sure what volt meter wires you are referring to. not many wires were removed from the harness, only things that I KNEW werent going to be used were removed.

    Coolant was screwed up completely when I bought the truck, they melted the sender and wire, then hacked it up trying to get it to work, so it was deleted. I will have to check, but I think I accidently deleted the oil pressure on the truck side. I was kicking myself when I couldnt find it before.

    Fuel gauge worked up until I dropped the tank, I am 99% sure it is a ground, I will get it working before anything happens though.

    AC is notched, compressor installed, need lines made from compressor to condensor and to the evap. I have the full AC system from the 2002, so they just need put together. The AC worked with the TBI, so I am sure it will work again once lines are made.

    Like I said, the major stuff is done, but I want to make you aware of everything, and I understand if at any time you want to back out. I just want to answer any questions I can to ensure you get as much information as you need.
    Last edited by SpecV44; 02-20-2010 at 10:35 PM.

  6. #46
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    Ok so assuming everything is a go will you be able to meet me Saturday (week from today)?

    Lookin forward to pics and vid.
    Thanks

  7. #47
    Join Date
    Jun 2009
    Location
    Cocoa, FL
    Posts
    135
    I will let you know for sure by monday. If I have to, I will go buy a truck this week to tow the white one up to you. I have my 88 f150, but I dont trust that thing driving 15 miles to work lol. My friend is skipping the races tomorrow to continue his hunt for a bigger truck, but if he doesnt find one tomorrow, I will have to go buy the 2004 sierra I have been looking at.

    Would you be willing to pay gas 1 way? I figured @ 15mpg it was almost $100

  8. #48
    Join Date
    Nov 2009
    Location
    Fort Smith, Arkansas
    Posts
    496
    We might work somethin out on gas but Im scrapin money together just to get the 2500

  9. #49
    Join Date
    Mar 2008
    Location
    Burleson, Texas
    Posts
    389
    Quote Originally Posted by flattopwill View Post
    Dang....if you weren't 18 hours away I'd probably come get it off your hands.

    Sure would like to see you get it going though
    that's what she said
    '00 Silverado 4.8L (Gone)
    '11 Silverado 4.8L

    Quote Originally Posted by RUFFNECK View Post
    ...First relieve the pressure before doin' that or else you will get a nasty squirt and may get in ur eye.

  10. #50
    Join Date
    Jun 2009
    Location
    Cocoa, FL
    Posts
    135
    Quote Originally Posted by flattopwill View Post
    We might work somethin out on gas but Im scrapin money together just to get the 2500
    if not, it is not the biggest deal in the world.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts