yeah i have no doubt if i had the mula all terrian fab in plano could 4 link mine in a month. IF all parts and money was ready from the get go.
yeah i have no doubt if i had the mula all terrian fab in plano could 4 link mine in a month. IF all parts and money was ready from the get go.
2009 CHEVROLET 1500 with a MONSTER 4.8 between the frame rails!!
Tuned by LSX Powersports ~ 4.10 ~ JBA Shorties ~ 4" Inlet/Outlet Spintech ~ Airaid Coldair
CST 3.5" Spindles ~ Camburg Upper Control Arms ~ 2.5" CCM ~ FFR Tie Rods
Full Throttle Suspension 3" Lift Blocks ~ Soft 8s wrapped in LT285/70/17 Silent Armors
I've been close to last option couple of times after getting
fed up with empty promises.
2002 Tahoe 4.8 - soon to be turbo'd - SOLD
1989 Mustang - LX Vert - 351W-TT - 2inches of dust covering it
2012 Raptor - 497rwhp at 10psi
If you aint breaking - you aint going fast enough
I voted 3 months. Coilovers are more time consuming than leafs and i saw a thread where someone did an SAS with leafs in 3 weeks. I think that is fast. A busy shop will take longer.
'02 Silvy: Z71 EC Step Side 5.3L Nelson tuned
2013 GMC Acadia: SLT1 Carbon Black
1976 Corvette Stingray: Trying to save it, progress is slow.
^Ricky's Sweet PS Skilz
09/21/2010 02:31 <danger_ranger83> I'm not really worried about the looks...I want it to be fast and ugly...bc no one wants to get outrun by something ugly
Fort Smith? Ever been on the trails in Fort Chaffee?
I was the driver for the Battalion S-4 the year we went to Chaffee (National Guard Reserves). He had to get to a meeting, and he thought he saw a "shortcut" on the map. Shortcut......yeah, right! I can tell you right now, the military Hummers are worth every penny Uncle Sam pays for them (about $36K if I recall from the supply printout).
The "shortcut" was named Devil's Backbone on the map. That shoulda tipped him off right there. Basically a ridge that's almost a mini-mountain. Going up the ridge wasn't bad. It was a little hairy with a barbed wire fence to my left and a 50ft+ sheer dropoff to my right, only seemed like a foot of clearance on each side.
Going DOWN the other side is where it got interesting. Boulders as tall as my hood, and one heck of a steep slope. I dodged every boulder I could, weaving like a fullback. Went over the ones I just couldn't miss. Of course, I was in 1st gear 4LO and riding the brake the whole time. At one point, my foot slipped off the brake for what seemed like half a second and I almost tipped the Humvee up on it's nose! The S-4 got scared and actually got out and walked the rest of the way down LOL! Mission accomplished!
I finally get to the bottom (would have been a lot faster but the officer had no clue how to spot for me, so I had to do the driving and guess at my own spots), and the S-4 gets back in. We're almost back to the main road when we run into a 35ft or so tank trap. I would have made it first try but the tread on my tires was almost gone. Ended up taking me like 10 tries. Water was over the door sills and coming into the interior past the (stupid vinyl skin) doors.
It ended up being a real adventure. Scaring the officer right out of my truck was a nice bonus. Even a plain stock Humvee can do amazing things in the right hands.
'02 Avalanche 1500 Z-71, BFG All-Terrains, K&N FIPK, Superchips tuner (Nelson eventually), 750-watt Alpine stereo W/ JL midgate Stealthbox.
'88 Mustang GT, 400HP on motor, T-56 6-speed, 3.73s, 150HP NOS
'89 K5 Blazer 1500, blown motor and transmission. Another project some year.
'95 Polaris 600XCR snowmobile, pipes, heads, bored carbs.
Ask the boys at the shop about it, I bet they know the exact trail I'm talking about. The way the tire trails on the way up the ridge looked, it's obviously a favorite spot for a 4WD club of some sort. Or at least it was back then (probably around '00 or '01 as a guess, the base had just been reopened).
'02 Avalanche 1500 Z-71, BFG All-Terrains, K&N FIPK, Superchips tuner (Nelson eventually), 750-watt Alpine stereo W/ JL midgate Stealthbox.
'88 Mustang GT, 400HP on motor, T-56 6-speed, 3.73s, 150HP NOS
'89 K5 Blazer 1500, blown motor and transmission. Another project some year.
'95 Polaris 600XCR snowmobile, pipes, heads, bored carbs.
Bring it down to Houston. The guys at BnC offroad will have it done in a month
Or Scott Stephens the old driver/owner of King Crunch Monster truck at Texas Truck Works in Magnolia, TX 77354.
Texas Truckworks
5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
_____________________________________
2006 2500HD 6.0L Crew Cab 2WD
These guys here do really good work also, ill be sure to take a lot of pics of the progress.
Tomorrow is the big day. Take some pics and let us know how it goes.
99RCSB Broke because I wasted thousands and thousands of dollars on my truck.