Starts but stalls..

[txarkitekt]

Nelson Performance - Security Relearn for no start

yeah sounds like the security relearn

+1. VATS will get ya every time! I would not go to the extreme of taking the mods off yet. Try the VATS relearn and it should fire right up!

I feel sorry for ya for spending all of that $$$$ by replacing all of those sensors. Next time, try posting your problems up here and wait for a few hours until someone posts a fix for the problem...

[justinjthomas]

+1. VATS will get ya every time! I would not go to the extreme of taking the mods off yet. Try the VATS relearn and it should fire right up!

I feel sorry for ya for spending all of that $$$$ by replacing all of those sensors. Next time, try posting your problems up here and wait for a few hours until someone posts a fix for the problem...

I looked up the website for the security instructions on nelson's website and still no luck. I pulled the cam out already and its back in the box and just put the stocker back in. And tomorrow I'm pulling off the heads and putting the stock 5.3l heads back on and bring it to thunder racing in baton rouge to get them to start it. I have a nitrous kit laying up stairs that I might throw on it till then.

Instead of doing the 219/233 109LSA cam, I was thinking about sticking with a ls6 cam and heads..

Thanks for all of yalls help so far.

Please keep the ideas rolling in before I put it on a trailer..lol

[justinjthomas]

I did the VATS relearn for about 3 hours yesterday and still no luck.

Currently located on a 20 ft trailer in the drive way ready for the dealership to
look at it for Wednesday.

I'll keep yall posted on what was the issue the whole time.

-Justin