New engine, popping under boost??

[George C]

i had a few issues i found on my setup


first issue i had want seemed to be a 3 bar map but was actually a older 1 bar map..in boost motor would just die and amost stall

second issue was my narrowbands were screwing with the tune. i shut them off and ran OLSD and never had an issue again.

i run un gapped plugs. so .035 and no issues with my combo

[Justin_Inc]

i run un gapped plugs. so .035 and no issues with my combo

x2, i would open the gaps up to .028-032, as for what it could be, tune, coil, plug, valvespring/seat (kinda doubt it), or just a tune issue.