Well, I thought I would update where I am now.

I made my coil relocate setup. NO dogging me, I am not a fabricator! They are on the firewall now. They stick out off the wall a little bit, so I am not sure that will be their final home.

Also mounted the trans and oil coolers, still need to finish running the lines. That is about as far as I am going before I pull everything back out!

Do to the drop, I am going to have to swap the oil pan for an F-body setup. Gotta pull the motor to do that. Since it will be out, I will swap the flex plate and install the PI 3,200 stall. Trans will get a shift kit too.

Some pics





Also a pic of the Detroit Locker, gears, and new bearings.