+ Reply to Thread
Results 1 to 10 of 11

Thread: knock sensor

Hybrid View

  1. #1
    when you replace knock sensors next time apply a silicone c shape bead around to front of the knock sensor on the valley cover to prevent water intrusion into the connector - don't silicone the rubber boot itself - just around the front of it - the problem should not return

  2. #2
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    Quote Originally Posted by GasGuzzler View Post
    Set aside a couple hours and get it fixed ASAP. Check the site for other P0332 topics.
    +1

    Quote Originally Posted by chevytech777 View Post
    when you replace knock sensors next time apply a silicone c shape bead around to front of the knock sensor on the valley cover to prevent water intrusion into the connector - don't silicone the rubber boot itself - just around the front of it - the problem should not return
    NICE--good call!

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts