textured plastic painting????

[DamnYankee]

Krylon Fusion in a rattle can...at about any hardware store...works great.

[l33z71]

do i need to prime first

[RedHeartbeat]

use Bulldog adhesion promoter on the bare cleaned plastic.

[Red03SilSS]

I wouldn't paint over texture. It look 1000x better if you remove the texture. To do so you do this

-red scothbrite the plastic
-Spray Bulldog adhession promotor on it
-4-5 coats of high build primer
-let dry 2-3 hours
-sand the primer with 320-400 grit or until al texture is gone
-preclean
-tack off
-seal it
-base it
-clear it

And your done. Perfect product.

[Speedy McD]

where do you get factory matching paint in the spray can?

[Red03SilSS]

I can ship you factory paint in a singlestage. But you would need a gun to spray it.

[Chevy-Art]

I wouldn't paint over texture. It look 1000x better if you remove the texture. To do so you do this

-red scothbrite the plastic
-Spray Bulldog adhession promotor on it
-4-5 coats of high build primer
-let dry 2-3 hours
-sand the primer with 320-400 grit or until al texture is gone
-preclean
-tack off
-seal it
-base it
-clear it

And your done. Perfect product.

Cool. Thanks.

[blue0453]

take it to a paint shop if you have no experinece, deffenently if you want it to be smooth, it takes a lot of water sanding with fine grit, prime, and plasti coat so paint will stick