Is this the correct plug for a front o2 sensor?
This what came on my harness and as I was shopping for sensors this site shows a different plug for the front o2... WTF?
http://oxygensensors.com/catalog.php...9507#Location0
What they are calling the rear o2 looks like what I have for the front o2 is there any difference besides the plug?
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
depends on the harness, year model and type of vehicle. Thats the kind that goes on the rear O2s on trucks. The 2002 model truck harness I have here has a flat four pin connector. Fbody cars have that style front and rear. V6 fbody harness has the opposite sex connectors, that's what all the Nelson harnesses have on them that I've seen.
Oh yeah, thats the same connector my truck uses.
Last edited by RedHeartbeat; 08-31-2008 at 10:21 PM.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Well my motor is a 2002 truck motor, the million dollar question is is there any difference in front and rear sensors other than the plug?
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
that plug in you have in your hand looks alot like the plug in for the park/neutral switch. my o2's were I believe were flat.
1996 GMC extended cab, 2003 5.3/auto
The NSS plugged in, its definately an o2 but I agree with you the fronts are a flat plug...Originally Posted by 468Blazer
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
nope, no difference from fronts to rears, at least the Fbody uses the same sensors front to rear. The only difference is one has a longer lead on it on the passenger side vs the driver side. Not 100% sure on the trucks. Corvette rear 02 sensors are commonly used on vehicles with headers, they work better with the cooler exhaust temps.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
are the wires black, black, purple and tan?
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
cant remember 100& but I am thinking two tans purple and black
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
Sure sounds like an 02 connector to me. I'd get the Corvette rear sensors and put them in there.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
ok so pretty much any o2 that fits the plug will work ok?
Tired ol' 5.7, 5.3 swap in progressHandle every stressful situation like a dog.If you can't eat it or hump it.Piss on it and walk away.
Posting Permissions
Reply With Quote