Truck threw 9 codes on the way to work. HELP!

[Red03SilSS]

My guess is that you have a problem with one of your injectors. That would cause the misfire, and I believe that when you get a misfire code it messes with the transmission settings as well, which might cause some codes from the tranny. I would check your injectors and the associated wiring and make sure that they are working properly.

Ok. The injector on the driver side at the back wont plug in properly. The thing that pushed down to lock it wont lock it. All the other are fine, when you plug that one up and push the thing down to lock it, it snaps like normal, but you can just barely pull up on it and it comes loose.

[ducky]

Ok. The injector on the driver side at the back wont plug in properly. The thing that pushed down to lock it wont lock it. All the other are fine, when you plug that one up and push the thing down to lock it, it snaps like normal, but you can just barely pull up on it and it comes loose.

I have two that dont lock in place but they havent fallen off yet. But if yours are real loose that could be causing it.

[txarkitekt]

Ok. The injector on the driver side at the back wont plug in properly. The thing that pushed down to lock it wont lock it. All the other are fine, when you plug that one up and push the thing down to lock it, it snaps like normal, but you can just barely pull up on it and it comes loose.

Go get a new gray tab locker thingy. They are be found for cheap from a customer's vehicle you prolly have around...

[Red03SilSS]

Go get a new gray tab locker thingy. They are be found for cheap from a customer's vehicle you prolly have around...

Ahhh.. Wll the shop truck is a 2000 model with a 5.3L do they have the same?



If I remember correctly tyler, were you the one that was pulling these plugs to get my intake off??? haha

[ChevyLee]

If I remember correctly tyler, were you the one that was pulling these plugs to get my intake off??? haha

Figures!