+ Reply to Thread
Results 1 to 10 of 14

Thread: Coolant/Chome

Hybrid View

  1. #1
    Join Date
    Feb 2007
    Location
    Fort Worth
    Posts
    9,578
    1. Take yo wheels off yourself and paint them with rattle can matte black. You may need to get the high temp paint...

    2. WTF? Don't listen to him. Did you do a coolant flush when you did the swap? If so...consider him a retard. If not, I would try a flush and refill in your near future...

    2000 ECSB 6.0L
    TORQUER V2 CAM ● COMP 918's ● 7.4 HARDENED PUSHRODS ● K&N SERIES 77 CAI ● 80mm BBK ●PACESETTER LT HEADERS AND 3'' ORY ● SUPER 40 FLOW ● 3000 STALL ● 4.10s ● BUILT 80e ● VORTEC PERFORMANCE TUNE ● MSD 8.5mm PLUG WIRES● ELEC. CUTOUT ● UD & ALT PULLEYS ● FLEX-A-LITE E-FANS ● 22" CENTERLINE STINGRAY III's ● LUND FIBERGLASS TONNEAU ● 2" LEVELING SHACKLES ● 12K HID LOWS & FOGS ● LEDs ● DEBADGED ● WHITE-FACED ESCALADE GAUGES ● KICKER 450.1 ● 2-CVR 10's ● DS60's ● K693's

  2. #2
    Join Date
    Sep 2007
    Location
    Texas
    Posts
    5,301
    you went to midas for an alignment

    David stay away from midas and meineke for any work. I wouldn't trust those guys to change the oil in my lawn mower. I forgot the name of the place that B&B suggested. They do great work. He was just trying to get a sale out of you. when i was working at sears the manager said check the mileage and then recommend everything on the list that is near how many miles they have. Why was he checking your coolant PH during an alignment ?

  3. #3
    Join Date
    Sep 2005
    Location
    Austin Tx.
    Posts
    13,138
    Quote Originally Posted by Srt8Jeep View Post
    PH level just indicates how good or clean the antifreeze is and also the freeze point I actuall thought 9-11 was pretty good but if Chevy recommends -11 better do a flush and refill. If Cody is coming from Austin to Waco you could give them to Daniel to paint. I think GM uses Dexcool and do not mix coolants of different brands as they may form a paste and ruin your engine
    Yeah like after the swap before I left for austin I had the local shop in Boerne that I trust flush my whole system and patch up aleak I had. I dunno what they were talking about..

    Quote Originally Posted by txarkitekt View Post
    1. Take yo wheels off yourself and paint them with rattle can matte black. You may need to get the high temp paint...

    2. WTF? Don't listen to him. Did you do a coolant flush when you did the swap? If so...consider him a retard. If not, I would try a flush and refill in your near future...
    I was thinking of doing it myself. Do I need to scuff them up at all or how should I go about doing it? I thought the paint doesnt stick to chrome very well?

    Quote Originally Posted by ChevyLee View Post
    you went to midas for an alignment

    David stay away from midas and meineke for any work. I wouldn't trust those guys to change the oil in my lawn mower. I forgot the name of the place that B&B suggested. They do great work. He was just trying to get a sale out of you. when i was working at sears the manager said check the mileage and then recommend everything on the list that is near how many miles they have. Why was he checking your coolant PH during an alignment ?
    Yeah I asked them how bad it was off, and they were like, "oh it was real bad" I was like thats wierd, it didnt pull to any side or vibrate when I was driving anywhere... city/highway..
    1951 3100
    1984 C10

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts