ok i have the zex wet kit with the controller too adjust fuel for lean or rich indications.im going too do a stand alone setup like meany o5 and i wanted too know a couple of things .does the n cm do the same as a window switch bassically ?or is the window switch a nother precautionary measure i should take? i dont want too blow something .is this kit gonna be safe i mean ive seen soo many ideas im going nuts figuring it out .i know its easy ,but i want to be safe.im only gonna probly run 50 -75 shot cause im f/i ive got the kit ,purge kit ,bottle opener ,heater ,tank gauge, am i missing anything.?also on the stand alone wet part ,do i need a fuel injected puump and regulator?i think meany has the aero ,fi stuff .do i need the high pressure stuff for the stand alone wet part,i want to run 107 octane in theyre?i know its probly yes just want to be sure.o and how do you attach a schrader valve to it too check pressure on the stand alone.?i know that its cut and dry for most of u guys but im up here in n.y. and im on my own i dont want any mistakes,god knows ive alreaady wasted alot of money on mistakes.thanks ahead.