+ Reply to Thread
Results 1 to 9 of 9

Thread: Close friend shot today

Hybrid View

  1. #1
    Join Date
    May 2004
    Posts
    2,120
    This happened earlier today. This totally blows. He's still in surgery and we're all praying for him and his dad. If you live in the Houston area you can hear about it on the 10:00 news. Jarred races drag bikes on his free time out at HRP.


    Shooting Suspect Causes SWAT Standoff
    Man Suspected Of Shooting Oil Change Facility Owner, Another Man

    POSTED: 2:42 pm CST December 23, 2005
    UPDATED: 4:56 pm CST December 23, 2005

    FRIENDSWOOD, Texas -- Officers have surrounded a southeast Harris County home where a man suspected of shooting his former boss and that man's father at an oil change facility has refused to come out, KPRC Local 2 reported.

    Houston police said the suspect shot the Universal Oil & Lube owner and his father in the chest shortly after noon on Friday at the car maintenance facility on Beamer Road near Hughes Road.

    "I was in the back room clocking out to go to lunch and I heard the pops. I heard one pop and I turned around and looked and I saw flashes," witness Aarash Tanjani said.

    Tanjani told KPRC Local 2 that he saw the suspect shoot one of the victims in the garage and then he walked into the office and shot the other victim.

    The victims were conscious as they were transported to Ben Taub Hospital in stable condition. Their identities have not been released.

    "They are the best employers I've ever had … the nicest guys in the world. They would do anything for us. They're faithful to this community, outstanding citizens," Tanjani said.

    The suspect fled the scene in a blue Suburban, but authorities quickly located the vehicle and the suspect inside a home in the 4800 block of Heritage Plains in Friendswood.

    A SWAT team sealed off an area of the neighborhood and has been negotiating with the suspect to come out of the home for more than two hours.

    Police said the man has refused to come out of the home.

    Witnesses told investigators the shooting suspect, 23, was fired from his job at the oil change facility a couple of months ago.ar


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  2. #2
    Join Date
    Jun 2004
    Location
    george west texas
    Posts
    3,694
    dude that really blows!!!! prayers go out to your buds and their family...i hope that sob gets his....
    '13 silverado LT...stock

    '11 lt 4x4 z71..tvs1900

    '01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance

  3. #3
    Join Date
    Sep 2004
    Posts
    665
    You have my sypmathy and prayers!
    No more trucks, but this is what I used to have. 2000 GMC Sierra, 6.0L-LQ4, Built 4L60, LS6 Cam, The Other Guys Headers, 3 inch exhaust and 7 chamber flowmaster, 43lb injectors, Nelson Tuning, Drop - 3/4 McGaughys Spindles, Bell Tech Shackles & Hangers. Best time 13.59 @ 106

  4. #4
    Join Date
    Nov 2005
    Location
    ohio
    Posts
    1,712
    IM AM SORRY FOR THIS TERRIBLE SENSLESS EVENT, really makes you appreciate your friends , family, and loved ones, god bless your friends and hope for a speedy recov. and hope that piece of shit dies, anybody that acts like tht doenst deserve to breath our air.
    07 SILVERADO CLASSIC 2500 HD 4x4 CREW CAB LT3 DURAMAX LBZ/ALLISON 6 SPEED 5'' MBRP Turbo back exhaust 6'' TIP /NO CAT- NO MUFF/ AFE Intake/ EDGE HOT JUICE /MERCHANT AUTO STG III Built Allison/P I ConverterTTS Twin Lift Pumps. Tierod sleeves/Cognito braces.17x9 Moto metals_______ Old Truck ,04 Z-71/Turbocharged,/cam/stall/Zippy Built TRANS/Nelson Tuned------

  5. #5
    Join Date
    May 2004
    Posts
    2,120
    The standoff is still going on about 4 miles down the road from me. There's a swat team with snipers on the roofs in the neighborhood waiting for the guy to come out.

    Thanks for posting your concerns guys!!


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  6. #6
    Join Date
    Nov 2003
    Location
    Denton Texas
    Posts
    20,540
    Sorry to hear that, man. With any luck the bastard will meet instant justice with a piece of hot lead.
    See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709

  7. #7
    Join Date
    May 2004
    Posts
    2,120
    They shot him last night and sent him to the same hospital my partners in!!! That's insane!!!! They should have sent him elsewhere like to hell!!


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  8. #8
    Join Date
    May 2004
    Posts
    2,120
    They shot him last night and sent him to the same hospital my partners in!!! That's insane!!!! They should have sent him elsewhere!! Feelings are gonna be pretty intense there.....


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

  9. #9
    Join Date
    May 2004
    Posts
    2,120
    Here's a link to the shooting.

    SHOOTING


    97 GMC, 2002 LS6.

    1991 GMC Syclone #1428

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts