I have extensive knowledge in lsx motors but not so much in the computer side. Trying to learn it... anyone care to help? Preferably someone who has done their own tuning.
Oh and I have a '01 Z71 ECSB 5.3/4L60-E... Bone stock other than MSD wires... but not for too long.
welcome, im still learning hp tuners also, its a PITA
THEY CALL ME G.
AZRAEL
2017 RZR 1000 2 SEATER
2023 RZR 1000 XP 4
2008 LTZ DURAMAX 3500
2023 300S 5.7
2023 BUICK ENCORE[/B]
The difference between winning and losing, is having a 2nd stage.
I'm playing with the demo version of the old school TUNERCATS, now known as jet chip's Dynamic Spectrum Tuner. Trying to decide which tuner to buy. They have a good price at $500 to tune 4 vehicles. I know 3 others that would go in so $125 a piece can't be bad. I like it but some stuff is confusing....
Go to the HPTUNER website and read read read read.... we'll see you in 6 years when you reach the end.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Try the forums for whatever tuning software you have. Lots and lots of very helpful info there. And there's a lot of people here who can help you make sense of it all
2007 RCSB|DTR81 built LSx 3xx|PRC|NX|BOGART|MSD|QUICKFUEL 950 E85|4L80|FTI Converters|Smith RaceCraft|Racepak
midweststreetcars.com
unfortunately, you won't get much help HERE on tuning...(probably b/c site host sells tunes, and does most peoples)
other forums is way to go. hp tuners or efi live is most commonly used around here.
blown transmissions are about as useful as 97% of the guys on this forum
It seems alot of people around this site use hp tuners. I personally like efi live. I would get hpt or efi live instead of tuner cats. You'll find alot more support for those products
2007 RCSB|DTR81 built LSx 3xx|PRC|NX|BOGART|MSD|QUICKFUEL 950 E85|4L80|FTI Converters|Smith RaceCraft|Racepak
midweststreetcars.com
You are going to want one of those softwares named above. For HPTuners make sure you get the PRO version. I was going efi live but I got a killer deal on a hptunrs pro new in box ($300Originally Posted by parker
) and i couldn't be happier. But either one is a good choice.
Step 1. crus at it.
Step 2. get a hammer.
Step 3. torch it.
Why pro? I was reading HPT forums and it seems like it would be better to go with the STD for $500 rather than the PRO for $650...You are going to want one of those softwares named above. For HPTuners make sure you get the PRO version. I was going efi live but I got a killer deal on a hptunrs pro new in box ($300
Because you can't log with a wideband O2 sensor with the standard HPT box. you can how ever with EFILives V1 cable. As long as your not looking to tune anything newer then 07, then it would suite you fine. ($550) You can download EFILive's software from Download Software and play around with it. It will be in demo mode till you register it. PM me if you have any questions about it.
01 ECSB 1/2 ton 4x4 6L GMC
11.03@127
KB Racing Borg Warner S475 turbocharged
Posting Permissions
Reply With Quote
