2007 chevy 5.3 waterpump. comes with bolts, thermostat, and thermostat housing. 300 miles on it and clean as a whistle. I need an Ls1 waterpump, hardened 7.4 pushrods and springs good to .660 lift. Will trade for those items or $100 shipping included. does not include pulley. good deal as a new pump is $150 with no bolts or thermostat. Waterpump is MINT. I switched to an ls2 intake so i need a different waterpump. Also fits 4.8 and 6.0 as well.
2005 GMC RST *sold
2006 Silverado SS with nawz
what was the interferance problem with the LS2 intake?
with either an ls1, ls2, or ls6 intake, you need to switch to an ls1 waterpump. theres a good write up on the front page for an Ls6 intake swap. itll have step by step how to and also what you will need. Brand new waterpump if you wanna have one in storage. Make me an offer....!
2005 GMC RST *sold
2006 Silverado SS with nawz
you run the 07 water pump with the car intakes and it clears
to use a ls1 water pump you need all car accesories
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
I am working on a solution for this, a spacer to move the water pump out to the truck pulley location. I don't have a way to test one here but they will be available for purchase before very long. The model is done and the machinist is about to start cutting on them.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
what makes the 07+ pump clear? i got a ls1 pump and used a power steering pully puller to pull the w/p pully out some to get good belt contact.Originally Posted by Quik
Also want to know about those spacers i want to run a electric pump
74 Austin Morris Mini 1000 - Daily Coil Spring conversion, lowered, Disc Brake conversion
FOR SALE: 04 RC/LB Duramax -12 second tow pig, built Allison, Tune, and supporting mods
FOR SALE: 03 Silverado SS -DBRods built 40X, DP, Suspension. Going for fast
How much of a spacer is needed for realignment for that condition?
about 1.25"
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
They're going to be aluminum and you'll have to buy longer bolts and an additional pair of water pump gaskets to complete the setup. My machinist says we can sell the spacers very soon.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
look at 07 pump vs a 06-99 pump.. youll see what im saying
2002 Lightning - GT headed 5.5Litre w/ Twin 7665s
2002 Silverado - 427Lsx w/ Twin gt4202s
2010 Silverado crewcab Z71 - 5.3litre w/ procharger
2000 Wrangler - 5.3litre with some stance
2014 Xsport- 3.5 Eco boost
412 Motorsports
it ain't that I'm too big to listen to the rumors, It's just that I'm too damn big to pay attention to 'em..That's the difference
Posting Permissions
Reply With Quote
