Last week i both a LS1 ´99 with only 3600 miles.
Where can I get motor mounts that will fit on my frame??
Last week i both a LS1 ´99 with only 3600 miles.
Where can I get motor mounts that will fit on my frame??
Ebay is a great place to get them. Get them made of steel and you can place the engine where you want it and weld tabs from the rubber mount up to the adapter plates.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Where do you get you motormounts ??
I can made i it by my self, but is´t much esayer if i can buy at conversions kit.
I made my first one off of a drawing that is stored on here somewhere. The second ones I used were made by NITROUS, another member on here, out of stainless. All others I have been associated to came from the Ebay seller and come with all the bolts you'll need.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
eBay Motors: LS1 LS6 CONVERSION MOTOR MOUNTS ADAPTER PLATES (item 330253032462 end time Jul-21-08 20:47:18 PDT)
This is the style I use. It moves the engine just a little forward to clear the back of the intake manifold to the firewall on the LS1 engine.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Here's a drawing so you can do it yourself...
http://matt.undiagnosed.org/ls1/imag...ount_plate.jpg
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
Thanks a lot.
eBay Motors: LS1 V8 S-10, S10, S-15, S15 Conversion Motor Mounts (item 330252872924 end time Jul-21-08 09:30:02 PDT)
This i the mount i need, cause it raise the motor a little bit.
The frame at the picture is exacty the same as mine
funny, it says for S10 which is a mini-truck.
See my truck data in the "My Garage" section here... http://www.ls1truck.com/forums/my-ga...tml#post191709
yes i know, but it may have the same frame as mine..
Posting Permissions
Reply With Quote