Forum: Powertrain

Alright guys, I need some advice on a build. I want to get my truck into low 11s or so and have about 15-17k to play around with. This is what I...

Well I found a TCI 3600 converter on Ebay that was never used and its 1k new from Summit... so instead of finding a stock converter for now i just...

Not only do they build fantastic exhaust systems, have EXCELLENT personnel, but they are built right here in ONTARIO! I don't know about you, but...

i put in the 65 and used the dipstick from my 60. It acts like it is too long and when you try to pull it it hangs. Any idea on what my installer has...

I want to get either the 2002 z06 cam...lift is supposed to be around .550 or a trick flow track max cam with lift in the .560's...I just wondered if...

So I got a little problem, and was wondering if anyone here had any ideas...ok, so Our work truck is a Colorado, and i put those rims on there......

My transmission will only sometimes shift from 3rd to 4th all other gears shift perfect. Does anyone know what could be causing this?

I'm building a 5.3 for a s10, all the work is done besides the cooling system and engine mods. I have a built 4l60e and 2500 stall, stock internals...

i want a cam that makes good power with out the choppie idle. also use the stock stall conv. i have obx long tubes y pipe and super 40. cai and...

I know that pretty much any mod from the 4.8 will fit the 5.3 wil fit the 6.0 and all combonations, but what are the different internal components...

Id like a link or info on folks that have swapped in a 6 speed into say, a 1996 gm truck that was originally auto.....or something simillar, probably...

i found a kit on ebay for $40 but i really think i can make one for about $10...if i know where to get the stuff.... i can make the block off...

Im sure this has been beaten to death but it's hard to search with 3 letter words. I have a 5.3 im building up for my S10 I already have an LS6 cam,...

who makes a great electric fan kit for my 2000 silverado let me know, thanks

well me still being new to the gen III motors i had a few questions on a cam selection for future in my yukon xl. well mainly i want something that...

Im new to the forums and I've read almost everything recent. I have seen that most of the people on here run the trans go shift kit and the vette...

Well, at 109,500 miles, it finally happened. I was WOT to pass someone, and at 4000 RPM, the engine started pinging BADLY, SES light came on, truck...