Forum: Powertrain

the 4l60e in my 2wd went out. i found a good deal on a 4l60e out of a 4wd truck. is it possible to switch the tail shafts to put the 4wd trans into...

I have done a search and read through them but all I have found is members saying that they have them and are going to install and not a followup. ...

Have been reading alot, but this is my first post. Would like to change 3.42/ G-80 to a 3.90 and Trutrac. Have noticed most are 3.73 or 4.10 in this...

From the beginning. My battery has been getting weaker, and it finally took a dump on me. I woke up yesterday and it was dead. So I jumped it...

Working on a 99 camaro v6 automatic. A guy that works for us put a motor in it. When you give it gas from a dead stop it makes a clicking sound like...

I have a pair of 28x11.50x16 drag radials from when I had my trailblazer SS (she got that in the divorce)....i know that the bolt pattern isnt the...

Check Engine Light Keeps Coming On P0102, I Replace Sensor And Connection On Maf, Cant Figure Out Why It Keeps Giving Me The Same Problem. Recently...

my truck is a 05 ecsb silverado with a 4.8 and about 87,xxx miles on it. the ole girl seems to be losing some power and a tad bit of gas mileage. im...

As the title sayes what kind of header wrap do yall guys that have turbos or not, use and where can u get it

When swapping the stall what all will I need, seals,gaskets fluid exc.... my mech said i didnt really have to replace nothing, but whats a few extra...

ok i have the basic mods CAI, cut out maf, exhaust and a cookie cutter tuner from quadzilla. Im about to ditch that tuner and get a custom tune...

was looking at the transgo hd2 from Oregon Performance Transmission on ebay for my 4l80e it says to get a new separator plate shouldent the shift kit...

Well at about 65 to 70 my truck starts to shake in the front end. I just rebalanced my tires and replaced the lower tre bushings. Any thoughts? What...

Got an 02 silverado,5.3, with a TR cam(561 lift,112 LSA,220 duration),ported heads,headers,and CAI. Will my stock injectors work with this setup??

I just finished my 5.3 swap after blowing my 4.8. Just hopping to at least make a little more HP than the 4.8. I put the same cam back into the 5.3....

Would yall re-use header gaskets with 250K on them? I got my LT's but need yalls advice on this since people say their re usable.

for the zex :burnrub: this is on my 08',i tried calling allen but no answer... lol probly busy...so can sum1 help me out here?not sure if the tps...

I have a 97 RCSB and did the 5.3 swap awhile back with the newer 4l60e and it blew up on me a few weeks ago and I have been doing without a truck...

finishing up my 80e swap right now wondering about putting a shift kit in it im puttin a yank 3600 converter in but other than that the trans will be...

Hello to all, I put a 5.3 in my 71 3/4 ton work truck. I went with a 96 nv4500 5 speed. This model has the internal slave. I am looking at the stock...