Engine | Transmission | Drive Axle | Chassis | Fuel
What is the horsepower limit on a set of stock 32lb injectors on my 2005 VIN-Z L59 on 93 Octane... I guess what i'm asking is can i run my 5.3 single...
i know this probably will get shot down quick, but i'm just brainstorming here... would running an intercooler on a N/A setup be beneficial in...
ok so i planned on going with a circle d stall and i plan on going with a 4000 stall but the 278mm circle d only goes up to 3200. So what should i do?
hey guys i have a question with this intake since i know a couple of guys on here are running it. what injectors do you guys use and how did you get...
I was wondering what would be the result of running a fuel pump that porduces 60-66 psi on an LS1 engine that needs about 58 psi. would this cause...
I have a 4.8 and can get a 5.3 if I want to spend the money. Question is: Arent the block on the 4.8 and 5.3 the exact same? the 4.8 just wasnt bored...
ok what would it take to make a th350 work in a 2003 rcsb.
Ok guys, I've been searching and reading and just want to get a final concensus. I recently acquired a 2001 5.3 ECSB with 81,xxx miles for next...
Ok the lowest was looking into getting another cam is 222/224........ no more than a 228/228. Really i'm looking for a tsp224r, anyone know of...
This is a question for all you Transmission Gurus......light my way ! Probably most of u know that my L5 was toast....I remembered I had a L4...
If anyone has a T-56 core and wants to make some cash fast, please PM me and hit me up. Preferably with bellhousing but will consider just the...
I bought a cam from a member recently and am unable to find any information on it. I was told it was a 220/222 .581/.581 114 lsa cam made by crane....
What would be needed to get these injectors to work on a 5.3??? i kno they have EV6 Connectors and are about a 1/4" shorter......... would the...
ok so we've all heard that the biggest we should go in a 5.3 rcsb truck is like 228 or so. My question is has anybody tried anything considered big?...
How much HP do you think i can squeeze out of the LIL 5.3? NNBS 90mm intake with edelbrock 90mm tb, ported 706 heads, bigger cam, current cam is a...
just wondering. . . the machine shop i took my 6.0l to assured me that they would give me Speedpro Powerforged pistons installed on my stock rods...
just rebuilt a lq4 and it wont make more that 20 pounds at idle and when it warms up its about 7 pounds ive changed the seal and the oil pump and...
So I'm going to use tax returns this year for a new cam and springs. I've been really set on the tsp220R..but I was curious how a 222/224 .581/.581...
casting number is 12551364 its a 6.0
I have a 2003 Avalanche Z71 with 373 gears and I am thinking of going to 410. Is there any threads on swapping the gears for 4X4 applications?
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
