All LS Based Conversions
so i got a 99 lq4 from a junkyard. i put a comp cam in it ( dur at .050 208int/212 ext and valve lift 554int/558 ext.) and beehive springs. got long...
Hey folks, new guy here. Been lurking for a while, figured I'd sign up and start being active. I've done some research on the LS swaps. I had a '56...
On a stock motor, can I reuse the head bolts? Thanks.
I was wondering what the possibilities are for hooking up transfer cases to the 4l80e. A 241C transfer case is whats in my truck right now (manual...
Hey I couldn't find what I was looking for searching. The only thing I haven't had time to do to finish my lq4 swap completely is hook up the factory...
http://www.dynomax.com/mufflers.php?muffler=ultraflox its got a built n x pipe. i think it would fit nicely in the stock location. anyone use...
Running a bone stock 2001 LS1 F-Body 4L60E tranny in my truck. Want a bit better shifting, that the Corvette servo kit is suppose to provide. But...
with the LS2 and the Mcloud bell set up you can see the protrusion of the bell that accomodates an optional starter mount if used. I am using a...
So i cant seem to find the answer to a couple little questions i have on my swap. Im running a th400 trans and a np241 transfercase. The truck is an...
i put a ls1 out of a 98 corvette. i got it from a guy that had it in a 57 Chevy. it came with a stand alone harness and the original comp. when i...
http://www.southernperformancesystems.com/BRP/88-98-truck.html Has anyone ever used these things in the GMT400 chassis? They aren't cheap like...
Im going to post this here since it gets more traffic. 5.3 swap from 2004 silverado with escalade dash from 2006 into a 88 k5. Could someone...
Dropping a 05 LS into a 1994 silverado 2 wheel drive automatic, do i need the spacer or only need the flywheel from a 99-02 truck with the round...
In to process of mating a 5.3 to a SM465 trans. I have ordered the sachs flywheel NFW1050, which is for a later model 4.8 or 6.0 engine that also had...
I am looking after the first of the year I plan on swapping in this LQ9 in our Tahoe. I need some heads and a cam before it goes in. I have a...
i have a 1999 6.0 i swapped into my 1999 1500 chevy but it doesnt has a removable spacer on the crank for the flywheel. is it possible to bolt this...
I have a 98 silverado 2wd 4.3l, i want to do a low cost engine swap but need to know what engine that I can replace engine with I know 96-98 are the...
I need some ideas on how to mount my PCM, post up pics!
2004 silveado 5.3 , DBW, matching 4l60e 4x4, escalade dash into a 88 k5 blazer, Using '88 transfer case 208 Ok so here are the few things...
It's going to be fun! Its the Edelbrock Performer RPM Manifold I am going to rebuild the carb and paint it, it's a Holley 750cfm I will be...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
