San Antonio or Houston Area
1. LSD/4:10 gears
2. 3200 Stall, is it that hard to install? can I do it myself?
Where should I buy and who should i get to do the install?
Hopefully the cam/springs will be in next Friday
San Antonio or Houston Area
1. LSD/4:10 gears
2. 3200 Stall, is it that hard to install? can I do it myself?
Where should I buy and who should i get to do the install?
Hopefully the cam/springs will be in next Friday
when are you going back to tball?
210 656 5220...ask for danny. to get the stall, i will help you install it at the craft shop or go to www.fuddleracing.com
go to Baytown for the gears, or
"As far as getting the rearend done, a good guy to take it to is a guy named Charlie Thrash. He has been in business since 1958. His business is Thrash differential and rear axle service. He did my rearend in my truck. Installed new gears set everything up and new bearing along with synthetic oil for 600 even. His number is 210-340-8900. He knows his stuff and has had his share of hot rods. "
<div class='quotetop'>QUOTE(AGRV8D @ Jan 25 2006, 09:32 AM) [snapback]42170[/snapback]</div>when are you going back to tball?
210 656 5220...ask for danny. to get the stall, i will help you install it at the craft shop or go to www.fuddleracing.com
go to Baytown for the gears, or
"As far as getting the rearend done, a good guy to take it to is a guy named Charlie Thrash. He has been in business since 1958. His business is Thrash differential and rear axle service. He did my rearend in my truck. Installed new gears set everything up and new bearing along with synthetic oil for 600 even. His number is 210-340-8900. He knows his stuff and has had his share of hot rods. "
[/b]
Tattoos, Kustoms, Chops, Guns and Pits..........Need I say more? AFTERLIFE KUSTOMS.
Getting ready to put an 82 Chevy 1/2 ton blazer under the knife.
EL JEFE
ROUGHNECK
I would check with Fuddle for the stall. They are cheap and people really like them, I would get at least a 3200 stall.
2002 Red Chevy RCSS (engine mods)- 05 5.3L, Procharger P-1SC 9lb.pulley, 80mm BBK TB, TB By-Pass, 38lb. Inj., AlkyControl Meth Kit, ASM L/T's, Magnaflow X-pipe, Borla's, FLT Level 5 4L65e, PI 3000 Stall, B&M Tranny Cooler, 3:73's, G-80, E-Fans, 160' Thermo. Custom Built Intake with K&N. WideBand 02 Sensor, DIXIE TUNED.
call joe..he will give you a good price for the tc install.....
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
<div class='quotetop'>QUOTE(bud8fan @ Jan 26 2006, 07:21 AM) [snapback]42306[/snapback]</div>think i should have him do my rear-end to?call joe..he will give you a good price for the tc install.....
[/b]
might ask him..i dont know if he knows gears but prolly does...
'13 silverado LT...stock
'11 lt 4x4 z71..tvs1900
'01 gmc twins 6.0 jakes 400 ladder bars w/ coilovers tuned by nelson performance
So, chorizo is a sausage, and isn't it also slang for "wang?"
2002 ECSB, Nelson Tune, LS1 electric fans, 145A alternator, K&N FIPK, 160º T-stat, TB coolant bypass, Corvette servo, 4 headlight mod, blue LED gauge cluster
lol........lil wang!
Chris
2009 Silverado, HPTuners, all stock.
chorizo=maxican sausage
I think he is saying he has a little unit.
2007 CCSB Z71 VortecMax: Stock!
Posting Permissions
Reply With Quote
