So i am doing a swap in a 88 c1500 with a 5.3 out of a 2002 Tahoe drive by wire. The guy I bought it from gave me a stand alone harness. I have changed out the intake for one off of a LS1 with a cable driven throttle body. Will my harness still work or do I need to get one for a cable drive throttle body?
Depends on what the harness is set up for...
2008 GMC Sierra SLE....370ci LY6 with some goodiesSOLD
1995 C2500- LS1 swap with a mp112
build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html
That harness will not work. Why not try something like the holley hp EFI? By the time you buy a harness, computer, tuning software, and wideband(holley has one built it) it's more expensive than buying the holley setup. Plus the Holley has features to tune itself, 1 timing table, changes can be made while it's running, no stopping and turning the truck off 100 times to re flash the pcm. heck of a lot simpler to tune.
Or just get the correct TB and pedal assembly?
2008 GMC Sierra SLE....370ci LY6 with some goodies
1995 C2500- LS1 swap with a mp112
build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html
Posting Permissions
Reply With Quote