+ Reply to Thread
Results 1 to 2 of 2

Thread: MLS head gaskets, MAF, rockers and guides, valve cover breather, ls1 throttle bracket

  1. #1
    Join Date
    Dec 2008
    Location
    South Carolina
    Posts
    794

    MLS head gaskets, MAF, rockers and guides, valve cover breather, ls1 throttle bracket

    MLS heads gaskets - these came in a rebuild kit i used to build an iron block 5.7...these were too small (96mm i needed 99mm bore size) had to get ls1 gaskets have no need for them. $55 shipped

    Rockers, bolts, and guides are off the 4.8/5.3 i used for the iron block 5.7 build. Was told they had 30k miles on them but not sure. One rocker and 2 bolts are missing. $35 shipped

    5-pin MAF off my 2000 silvy- it is descreened and has a chip in it as shown in the pic. Worked great when i took it off-went with a SD tune and have no need for it. $30 shipped

    LS1 throttle cable bracket w/ bolts- $10 shipped

    K&N breater filter goes in place of the pcv valve...little dirty but will clean right up with a k&n recharge kit... $10 shipped

    If ya see anything your interested in the quickest way to reach me would be to text me at 864-542-6558. Shipping is to the 48 states only
    Attached Images
    2008 GMC Sierra SLE....370ci LY6 with some goodies SOLD
    1995 C2500- LS1 swap with a mp112
    build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html

  2. #2
    Join Date
    Dec 2008
    Location
    South Carolina
    Posts
    794
    more pics
    Attached Images
    2008 GMC Sierra SLE....370ci LY6 with some goodies SOLD
    1995 C2500- LS1 swap with a mp112
    build thread- http://www.ls1truck.com/forums/lsx-t...-ls1-swap.html

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts