+ Reply to Thread
Results 1 to 2 of 2

Thread: Had the old man cam installed!

Hybrid View

  1. #1
    Join Date
    Nov 2004
    Posts
    14
    Well I decided since I had all the stuff to install a cam including LS6 ported oil pump and JWIS chain I was going to have it all installed. I sold the TR220 to destruckive a while back so I called Thunder Racing to get another. I talked to David for a while when we both decided that the old man truck cam was the way to go since I still have the stock converter and 3.42 gears.

    specs 215/220 .600/ .532 114*+2

    So I had it installed and got a 93 hot re tune from allan and it acts like a totally different truck! Slight lope but nothing noticeable and it pulls hard from 2500 and up. I raced a WS6 that was stock with a automatic trans and was beside him from a 30 roll to 80. Then this past Thursday I totally killed a Nissan Titan from a 70 roll on the interstate and it was the ex cab 2wd version. Hopefully in the next couple weeks im going to get it dynoed again. And for August im gunning for a built transmission and a PI 2800 stall. And the exhaust note when reving is killer.

  2. #2
    Join Date
    Oct 2004
    Posts
    259
    I dont know if you already had a nelson tune or not but that would have been a better choice IMO. When I had the my TA I wanted a TR stick but I was lookin at the one two steps above the old man cam.
    Had a 91 SB, Open diff, 3.08 gears, stock LS1/T56. 14.8@95.9...sold.
    Now, 90 C1500 350tbi/NV3500....just bought a 5.3...need T56, Swap parts.....

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts