+ Reply to Thread
Results 1 to 10 of 10

Thread: Seat Heaters

  1. #1

    Seat Heaters

    ok.. my 2003 SSS's seat heaters are acting up.
    today was the first time all winter they got warm. .then hot.. then stopped.
    forgive the awesoe 80s metal in the vid.. but here's what im seeing

    http://www.youtube.com/watch?v=DbdvoyncpZI
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  2. #2
    Join Date
    Jan 2009
    Location
    Austin, TX
    Posts
    366
    your seat back or seat bottom element is most likely shorted open. you can ohm the element circuit and find witch one is shorted then pull your seat cover off and replace the element or take it too the dealer and then they will do the same for $$$$$. Where are you located? i can fix that, that's "GRAVY!"

    5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
    _____________________________________
    2006 2500HD 6.0L Crew Cab 2WD

  3. #3
    im right outside chicago
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  4. #4
    Join Date
    Jan 2009
    Location
    Round Rock, Texas
    Posts
    1,699
    Lol. You need a DMM or have Shifty look at it for you.

    P.S.- Move to Texas, then you won't need heated seats.
    cjriojas:if you're weather man is a 5 gallon bucket, YOUUUUUUUUUUU might be a redneck
    danger_ranger83: I see now why it cost so much to get a harness made... FML
    2boostedSilverado: I like Casey's rear end, I want to chat with him about it

  5. #5
    haha still would bug the hell outta me knowing they are broke
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  6. #6
    Join Date
    Jan 2009
    Location
    Austin, TX
    Posts
    366
    What do you think is making the Drivers Memory Module kick Off? Maybe.... it dectects a fault, like an open circuit.

    5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
    _____________________________________
    2006 2500HD 6.0L Crew Cab 2WD

  7. #7
    no i was pressing the drivers memory module.. however i wouldnt doubt that module causing the seats to act up like this.
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  8. #8
    Join Date
    Jan 2009
    Location
    Austin, TX
    Posts
    366
    Quote Originally Posted by MidwestSS View Post
    no i was pressing the drivers memory module.. however i wouldnt doubt that module causing the seats to act up like this.
    How can you press the Drivers Memory Module when it's located under the drivers seat?

    5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
    _____________________________________
    2006 2500HD 6.0L Crew Cab 2WD

  9. #9
    sry.. meant the memory buttons for each driver.. sorry been LONG day
    Sponsored by Taylor Wires!
    Sponsored by PowerMaster!!
    Sponsored by FROZEN BOOST!
    Sponsored by US Speedo!

  10. #10
    Join Date
    Jan 2009
    Location
    Austin, TX
    Posts
    366
    Just jokin with ya

    5.3, E-fans, LPP longtubes w/offroad Y, Dual Magnaflow, K&N Cold Air, 160 thermo, Voodoo 212/218 .531/.531 113 cam, Nelson Tune, 4:11, Built 4L65E, TrailBlazer converter. SOLD
    _____________________________________
    2006 2500HD 6.0L Crew Cab 2WD

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts