This lift plate has several hook locations making pulling your engine easier and safer.
6 bolts hold this plate against your valley cover plate. Plate is Steel. We can build more if needed.
50.00 + freight + fees.
Pm or call me if you have any questions.
940-781-5204
lifplate.jpg
Simply the best turbo kit for late model GM trucks.
Custom fabrication to fit your budget and needs.
Dealers for Precision, Comp. & Magnum turbos.
Online Store
[/CENTER]
So do use longer bolts to make sure you have enough threads in the block. In past always take the valley cover off and then bolt the plate down.
Truck 2002 Chevy with
old setup KB turbo kit MP70 LS1
New setup stock for now
No the stock ones are fine. With 6 bolts there is plenty of holding force, I do recommend you tighten them so there is no slop in them.
Here's a pic of the plate I use.
The stock one engage deeper then the ones I had used in the 2nd pic.
liftplate2.jpg
Threads already started 1 full turn. Still plenty to go.
liftplate.jpg
Simply the best turbo kit for late model GM trucks.
Custom fabrication to fit your budget and needs.
Dealers for Precision, Comp. & Magnum turbos.
Online Store
[/CENTER]
That good to know. Sorry i have one already. I wish i would have thought of that when i did my motor swap. Good info.
THanks
Truck 2002 Chevy with
old setup KB turbo kit MP70 LS1
New setup stock for now
Posting Permissions
Reply With Quote
